14" Steel Frame Bandsaw - 1-3/4 HP 1 Ph 115/230V - JWBS14-SFX

• Deeper table with a massive 360 sq. in. of cast-iron work surface for greater workpiece support
• Over 13" resaw capacity for cutting large pieces of wood, slicing veneers, and cutting book-matched panels
• Heavy-duty tubular steel welded construction with a total weight of over 300 lbs.
• Dual 4" dust ports for maximum dust collection efficiency
• Independently adjustable, upper and lower ball bearing blade guides
• Convenient 115V AC outlet location for optional accessories
• Engineered die-cast and steel trunnion system allows for single joint adjustments when moving table
• Larger machined aluminum fence surface with easily visible measurements for the most accurate cutting
• Robust stamped steel doors with welded steel pin hinges for greater product durability
• Cast Iron Wheels

• Power: 1-3/4 HP
• Voltage: 115 Volt (prewired) / 230V
• Recommended Circuit Size: 20A
• Motor Phase: 1 Phase
• Motor Speed: 1720 RPM
• Power Transfer: V-belt
• Power Cord and Plug: SJT 14AWGx3C, 6 ft., 5-15P plug
• Recommended Circuit Size: 20A (for 115V), 15A (for 230V)
• Sound Emission without Load: 75 dB at 3 ft. (900 mm) from blade
• Bandsaw Nominal Size: 14"
• Bandsaw Wheel Diameter: 14"
• Blade Length: 116"
• Blade Width: 1/8" to 3/4"
• Cutting Capacity: 12" W; 13.3" H
• Blade Speed: 3,000 SFPM
• Wheel Speed: 765 RPM
• Table Material: Ground cast iron
• Table Insert Material: Anodized aluminum
• Table Height: 40"
• Table Size: 21-1/2" x 17"
• Table T-Slot: 3/4" (x2)
• Table Tilt: 45° R
• Stand Type: Closed
• Frame Material: Steel
• Wheels: Cast iron
• Tires: Polyurethane
• Blade guides: Ball bearings, aluminum block
• Resaw Fence: Extruded aluminum
• Resaw Fence Size (L x W x H): 18-1/4" x 6" (463 x 155 mm)
• Dust Collection Minimum Required: 350 CFM
• Dust Port: 4" Outer Diameter (x2)
• Overall Assembled Dimensions (L x W x H): approximately 37" x 27-1/2" x 75-3/8"
• Footprint (L x W): 24-7/8" x 17-3/4"
• Net Weight (approx.): 300 lb.
• Warranty: 5-year JET Red Assurance

• (1) Jet® 14" Steel frame bandsaw
• (1) Steel stand
• (1) Table with insert pre-installed
• (1) Dust chute
• (1) Resaw fence
• (4) Hex wrenches, 2.5/4/5/6mm (not shown)
• (1) Operating Instructions and Parts Manual
• (1) Hardware pack

Shipping / Billing Information

All shipments must be inspected and any damage reported within 3 days of receipt.
Address corrections and cancellations may not be possible once order is submitted. Requested changes may incur additional charges.
This product ships direct from the manufacturer:

• Your order will ship in 7-10 business days.
• This product is considered special order. Your account will be charged when you place your order.
• Express or overnight shipping is not available for this product.
• Ships by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.

Return Information