Matsumura - 1/8" Blue Steel Bench Chisel - Matsumura
Image shows the full chisel as well as an enlargement of the tip / blade. Overall length is 9", with a blade lendgth of 2-1/4". Aogami Hagane means 'blue steel' and is a more complex steel than...
Item 156473Model W-M-BMEN5/8
Item 156250Model W-M-BMEN7/8
Item 156337Model W-M-BMEN3/8
Item 156630Model W-M-MEN1
Item 156248Model W-M-BMEN1/4
Item 156258Model W-MBUMEKI3
Item 156472Model W-M-BMEN1/2
Item 156252Model W-M-BMEN1-1/2
Item 156099Model W-M-BMEN2
Item 156471Model W-M-BMEN5/16
Overall length is 9", with a blade lendgth of 2-1/4".
Aogami Hagane means 'blue steel' and is a more complex steel than Shirogami Hagane or 'white steel'. Blue steel edged tools give the most durable edge possible, particularly in hard abrasive woods. Each chisel is forge-welded by hand from a combination of Hitachi blue steel and wrought iron, cured in charcoal for several days, and then individually tempered to HRC65. The handles are made of the finest quality Akagashi (Japanese Red Oak) and fitted with hand-forged iron hoops. Over 40 seperate processes are required to make each chisel, including the razor edge. Overall length is 9", with a blade lendgth of 2-1/4".
The Matsumura Family has been producing woodworking chisels for well over 200 years. Mr. Shigezo Matsumura began his apprenticeship at the age of 15 and exhibited such skill that by the age of 25 he was able to open his own workshop. For over 60 years, first as an apprentice and now as a true Master of Blacksmiths, Mr. Matsumura has made chisels one at a time in the old tradition, preferring to use charcoal instead of gas in the forging and tempering process, because of its 'sof heat,' and only the finest white and blue steels for the cutting edges, which are laminated to wrought iron for strength. All cutting edges are tempered to Rc64 and sharpened for immediate use. Note: Mr. Matsumura operates a one-man shop and personally makes each tool, with occasional assist from his wife.