What to Do With Leftover Paint: Painted Ornaments

Comments (0)

After any upcycling or painting project, I always end up with leftover paint – not enough for a big project, but too much to throw away. I decided to try using my extra Black Dog Salvage Furniture Paint for glass ornaments this year to see how well it would stick on a non-porous surface and to test the blending capabilities to get some nice shading effects. At the same time, I had found a great use for all those leftovers.

Featured on Hometalkcom

Painted Ornaments

Here's what I did.

1. Gather supplies.

Leftover paint in a variety of colors     
Wire Hooks
Inexpensive glass bulbs                               
Paint Brushes                                                 
Extra Glitter (Just because I like it!)
General Finishes Extender                        
Rainbow Flakes sparkly stuff

Ultra-Fine Black Sharpie

Painted Ornaments

2. Start Painting!

With a little imagination, I used bits and pieces of some ornaments I liked on Pinterest to paint my ornaments. If you don’t feel you are a good painter, snowmen are easy – white blobs!

This photo shows the base coat on the ornaments before any shading was added. Snowmen bodies, scarves and hats were all painted in this step.

I like to use wax coated paper plates for mixing paints. I painted on both frosted and clear bulbs and the paint adhered really well to both.

TIP: A muffin tin makes a great place to let your ornaments dry between steps. The original boxes they came in may hold the ornaments too tightly and smudge your paint if it is still wet.

Painted Ornaments

3. Add shading and effects.

This little guy was painted using Clean Canvas for the base of his head and Go Green for the scarf. After the paint dried a little (but not totally – too wet and you will drag it back off), I thinned some Roanoke Rain with the General Finishes Extender to get the paint a little more blendable. It should be pretty watery and pale at this step – it doesn’t take much paint for this effect. I took a small amount on the brush around the outside edge of his head to get the shading I wanted. Where I felt like it was too much blue, I just went back and added more white to the center and blended it out.

I also added some light pink cheeks using a very thin mix of Appalachian Sunset, Clean Canvas and Extender.

The carrot nose was a mix of Caution: Dogs at Work with a little bit of Appalachian Sunset and Dirt. I didn’t want the color to be one dimensional, so I didn’t blend it “too much.”

Painted Ornaments

For the scarves, I wanted to create a little bit of interest with some stripes and plaids. Using a liner brush and paint thinned down with the Extender, I added layers of different colors over top of the base color.

I went back and added in “coal” for eyes using the wrong end of a paintbrush and simply tapping it in the Black Dog paint. I added some red holly berries in a couple places using this method. You could add a tiny dot of white to create a “shine” using a toothpick or smaller brush end. Smiles were simply squiggly lines with another line at each end.

4. Create outlines. 

Not everyone does this but I like the way the little black Sharpie outline sort of cleans up my imperfect paint lines and makes everything pop. See the difference?

For some of the snowmen, I outlined them with a solid line; in other places I used a dashed line around the outside edges.

5. Add snow. 

I like to use a stiff, crappy brush for this step even though the snow is water soluble. I used Aleene’s Glitter Snow and crystal white Darice Glitter to create the sparkly snow effect. Using a dabbing motion, I added the snow to the top of this ornament, then sprinkled some of the glitter onto it while wet.

On some of the ornaments I added snow along the bottoms where the snowmen were sitting. Same method – dab it on and add glitter. I even took a little bit of the glitter snow and swiped it along the snowman’s cheeks for some sparkle there.

For the large clear bulb, I removed the metal cap and used a funnel to put some of the rainbow flakes inside.

Where the ornament was empty around the sides, I added snowflakes using thinned down Clean Canvas and the skinny liner brush. There are a couple different ways I like to do this. They don’t have to be perfect, because snowflakes are all different! You’ll see in the picture that I use my pinky to steady my brush as I paint.

  • I simply made a “+” sign with long tails, then went back and added a smaller “x” across it. At the ends of the “+,” I put tiny dots.
  • Create little asterisks with the white paint. Makes just the right shape and super easy.
  • I added some white dots as more, smaller snow by using the wrong end of the brush like I did for the eyes.

Snow added to the bottoms.

Snowflake sparkles poured inside clear bulbs

Paint snowflakes in an asterisk pattern.

Dots added as snow. 

6. Add ribbon and hanger. 

Lastly, I added some ribbon and a wire hanger to the bulbs and they were ready to hang or give as gifts!

My conclusion is that the Black Dog Salvage Furniture Paint works great on glass ornaments and is easy to blend and shade using some Extender. And it is a neat way to use up some of that leftover paint.

Stop by your local Woodcraft store to see all the Black Dog Salvage Furniture paint colors in person or shop online.

We hope you’ll be inspired! 

Related Products


Write Comment

Write Comment

You must be logged in to write a comment. Log In

Top of Page