Sharpening Systems by Work Sharp

Comments (0)
Sharpening Systems

Four sharpening systems by Work Sharp® can tackle all the sharpening your woodshop and home require. At the Woodcraft Vendor Trade Show in Columbus Ohio, we received a first hand demo of the Work Sharp 3000, Woodcraft Item #148124.

The Work Sharp 3000 wood tool sharpener let’s you monitor stock removal from above with the “see-through” wheel while a large port provides access from underneath. This works exceptionally well for sharpening large turning tools quickly and efficiently while also providing a means to sharpen and hone carving tools, especially the smaller profiles that require a more delicate touch. This is an air cooled, dry sharpening system that uses maintenance free 150mm tempered glass wheels to which you adhere PSA abrasives. Slotted “see-through” wheel allows for fast and precise sharpening of carving and lathe tools. The precise and repeatable sharpening port enables sharpening of 20, 25, 30, and 35 degree angle chisels and plane irons up to 2″ wide. No jigs are needed; just select angle and sharpen. Lapping abrasive in the sharpening port increases burr removal and speeds sharpening. The rigid bevel angle settings and skew cam provide precise positioning of the sharpening port. Bevel and skew geometry are not affected by wheel diameter, chisel size, or complex user setup. Forced air-cooling and the sharpening port heat sink allow for higher material removal rates without affecting the steel temper. It allows for quick reshaping of a new or damaged chisel, and fast honing of a micro bevel. The precise bevel angles are set in the sharpening port, not in a fixture or jig, so switching between angles is simple and fast. No re-calibration is required for changing wheel diameter or tool size. Coarse grind for rapid shaping and then micro-fine hone all in one port. The Work Sharp 3000 comes with a 2 year manufacturer’s warranty and the following accessories: 2 tempered float glass wheels, a “see-through” slotted wheel, top tool rest, crepe stick, and PSA abrasive kit. It has a 110V, 1/5 hp motor, 580 rpm (gear reduced), and weighs 16 lbs.


  • Air cooled, dry sharpening system
  • 150mm tempered glass wheels
  • Slotted “see-through” wheel
  • 110V, 1/5 hp motor, 580 rpm (gear reduced), 16 lbs
  • 2 year manufacturer’s warranty


At the Woodcraft Vendor Trade Show 2012, Joe Ademino demos the Work Sharp 3000 System,
Sharpening Systems

Work Sharp also offers a Knife Sharpener, Woodcraft Item #151270 that easily sharpens all your kitchen knives, hunting knives and scissors on your WorkSharp 3000 with their new Knife Sharpener. It’s quick and economical. The Sharpener is comprised of a drive wheel, blade guide and 3 (coarse, medium and honing) long lasting abrasive belts. It’s easy to set up, use and puts an edge on knife or scissors in short order.

  • Easy To Mount and Use
  • Fast
  • Economical
Sharpening Systems

Use this Work Sharp 3000 wide blade attachment to grind, sharpen, and hone most plane or chisel blades up to 3″ wide. It works with the 3000′s glass plate and utilizes the entire abrasive surface, which you can’t do using the chisel port. The attachment has three main components; a plate which attaches to the back of the 3000, a guide which holds the blade and rides on the plate, and a bevel setter. It’s easy to set up and use.

  • Includes (1) flat top table, (1) blade alignment fixture with bevel angle gauge and (1) honing guide
  • Top table is precision machined metal casting
  • Honing guide is cast metal with side clamping design
  • Hone blades up to 3 inches wide, angles from 15 to 60 degrees, 1 degree micro-bevel feature
  • All tools and hardware for installation are also included

Replacement Knife Sharpening Abrasive Belts are available for purchase separately.

Sharpening Systems
Sharpening Systems

To complete the Work Sharp System offerings, this hand held motorized system, Woodcraft Item #151170 is great for sharpening any knife as well as scissors, tin snips, garden shears, lawn mower blades and a host of other tools. Patented Flex-Tek™ belt technology conforms to the shape of any blade, so the sharpener is easy to use and practically guarantee’s a sharp edge. Includes 2 guides for outdoor or kitchen knives, coarse, medium and fine grit sharpening belts, instruction booklet and instructional DVD. Replacement belt kit contains 6 belts, two each of the P80, P220, and 6000 grits.

Related Products


Write Comment

Write Comment

You must be logged in to write a comment. Log In

Top of Page