Guitar and Table Creations Claim Top Woodcraft Resin Contest PrizesComments (0)
David Ison’s “Black Walnut Coffee Table,” right, and Max Shen’s “Coastline Telecaster Guitar” were top winners in the “Pour to Win” Contest.
“We are very pleased with the response to Woodcraft’s ‘Pour to Win’ Contest – 530 entries,” President and CEO Jack Bigger said. “It confirmed the growing interest among makers to create with resins. Congratulations to the five winners and a big thank-you to all the entrants for participating.”
Judges selected Shen, from Redwood, California, as the Woodcraft Judges Award winner for his “Coastline Telecaster Guitar.” Contest voters picked Ison, from Catlettsburg, Kentucky, as the Vote Award winner for his “Black Walnut Coffee Table.”
The three runners-up
chosen by the judges are George N. Partal, MD, of Bangor, Maine, “Magical Pearl
Vase;” Tim Terras of Spring Creek, Nevada, “A Nest of Dragon Eggs;” and Chris
Yacoub, no address available, “Knife.”
Shen and Ison will each
receive a $250 Woodcraft Gift Card. All five winners will receive a Woodcraft
Prize Pack that includes a Woodcraft T-Shirt, a Woodcraft Enamel Mug, a
Woodcraft Sticker, and a Woodcraft Beanie.
GRAND PRIZE WINNERS
been working on resin projects since 2018,” Max shared in an email interview.
the prize-winning guitar build, Max said, “I was experimenting with uncommon
guitar building techniques. The main body was primarily cut on a CNC router
rather than a bandsaw, and the fretboard was laser cut instead of using a
fretsaw, which took a few tries to get right.”
“I have only been using epoxy for about a year,” David explained, “and this was my second epoxy coffee table. This piece was a gift to my girlfriend Amy.”
material used for the top was an air-dried slab of Black Walnut, which David split
into halves and then glued the Walnut lumber together to achieve the thickness
of stock that he needed in order to be able to bandsaw out the curved legs.
David created the1-1/2"-thick tabletop in four epoxy pours. When the resin got to almost the consistency of peanut butter, he created the swirls and designs in the resin by dragging a paint mixing stick throughout the pour. Then he filled the rest of the void between the slabs to a flush state, using deep pour epoxy, while the first pour was still tacky.
David brushed on a seal coat, followed by a flood coat that he poured on and troweled over the surface. He used a heat gun to remove bubbles during curing, and then finished the table’s legs and skirt with spray lacquer.
RUNNERS-UP (Chosen by Woodcraft Judges)
George N. Partal, MD
George created this 12" by 9" “Magical Pearl” Vase from a locally harvested Cherry burl that was dried in a home-made kiln for a couple of months and then turned on a lathe to a roughly cylindrical shape to expose voids and bark inclusions. After removing the bark, George surrounded the Cherry burl with flexible plastic sheeting to form a container to hold the hot liquid resin. He mixed the resin with colored mica powder and poured the mixture around the burl, trying to control the color blends as much as possible. The burl/resin material was then cast under pressure to collapse the bubbles and left overnight to form a solid block ready for turning.
The wall of this vase is less than 1/8" thick. Accents
are copper inlay. It is finished with sanding sealer and multiple layers of
oil/varnish buffed to a "glass-like" mirror chatoyance. Not counting
the drying time, George said the process took about a week.
George has been doing resin casting for the past 5 or 6
Tim used dead-standing Big Basin Sagebrush to create the eggs in his prize-winning “A Nest of Dragon Eggs.”
type of sagebrush grows 7 to 8 feet tall and lives for over 100+ years,” Tim
peeled the bark off the sagebrush, made a mold, and then poured the resin (a
deep pour) over the sage in the mold. Next he put the material in a pressure
pot and left it for 24 hours at 50 PSI. After removing the sagebrush/resin
piece from the mold, Tim turned it on a lathe to create the Dragon Egg shape.
full-time woodturner, Tim began working with resin in early 2019.
To create his “Knife” entry, Chris etched an Aluminum Honeycomb Core to degrease it and then cast it with resin, using a combination of dyes and powders. The newly cast material was then cured under pressure to remove bubbles, and the knife scales were cut out on a CNC machine, sanded and buffed. Scales were then mounted on a knife.
To view all the “Pour to Win” Contest entries, log on to www.woodcraft.com/pour-to-win.
TOGETHER, WE CAN CREATE ANYTHING®
Item 166300Model 365CW
Item 167178Model KBMD
Item 167942Model 10141
Item 173669Model 3150S06
Item 173677Model 3158S06
Item 174211Model SP-11
Item 174215Model SP-5HB
Item 418404Model D26960K
Item 852917Model 42250
Item 860932Model 10145
Item 870153Model 10041
You must be logged in to write a comment. Log In