Your Store

Woodcraft of Allentown

Image of Woodcraft of Allentown

Contact Us

Phone:
(610) 351-2966
Fax:
(610) 351-3211
Email:
allentown@woodcraft.com

Parkway Shopping Center 1543 Lehigh Street
Allentown, PA 18103
USA

Hours of Operation

sunday 12 PM - 5 PM
monday 9 AM - 7 PM
tuesday 9 AM - 7 PM
wednesday 9 AM - 7 PM
thursday 9 AM - 9 PM
friday 9 AM - 7 PM
saturday 9 AM - 6 PM

Connect with Us


A.M. 7-Class Woodturning Course (Class 7/7) -- CLS271 with: Ed Youtz
Beginner

Wednesday, April 24, 9:30 AM - 12:30 PM

Prerequisite: Completing Spindle I, Introduction To Woodturning
Tools Required: Face Shield
Description: This course follows SPINDLE I and will turn the beginner into a safe, experienced, wood turner. The seven 3-hour classes build the student's understanding and skill through practice on beads and coves, tool sharpening, eggs, matched multiples, a cup and lidded box, plate, and bowls. Weekly projects go home with the student and the method of instruction is demonstration and coaching.
Tuition: $350.00

Click Here to Request Information

P.M. 7-Class Woodturning Course (Class 7/7) -- CLS271 with: Ed Youtz
Beginner

Wednesday, April 24, 5:30 PM - 8:30 PM

Prerequisite: Completing Spindle I, Introduction To Woodturning
Tools Required: Face Shield
Description: This course follows SPINDLE I and will turn the beginner into a safe, experienced, wood turner. The seven 3-hour classes build the student's understanding and skill through practice on beads and coves, tool sharpening, eggs, matched multiples, a cup and lidded box, plate, and bowls. Weekly projects go home with the student and the method of instruction is demonstration and coaching.
Tuition: $350.00

Click Here to Request Information

The Art Of Plate Turning -- CLS268 with: Ed Youtz
Beginner/Intermediate

Thursday, April 25, 5:30 PM - 8:30 PM

Prerequisite: Introduction To Turning Or Spindle Turning I
Tools Required: Full Face Mask
Description: Learn how to turn basic plates. Turned plates or platters make attractive household ornaments. They show off the beauty of wood and make a great fruit or candy dish. You will be guided through mounting, designing, and finishing as you create your own small platter from an 8" blank.
Tuition: $75.00

Click Here to Request Information

Working With VCarve, Session IV -- CLS639 with: Neil Brown
Intermediate

Friday, April 26, 5:30 PM - 8:30 PM

Prerequisite: Working With VCarve Session III
Tools Required: Laptop Computer
Description: This is the 4th class in the series and will advance the skill level of the student to use VCarve software. In this class the student will learn how to use design 3D project, import 3D objects, manipulate 3D objects, create a toolpath and machine a 3D model.
Tuition: $85.00

Click Here to Request Information

HVLP Spray Finisher -- CLS177 with: Neil Brown
Beginner

Saturday, April 27, 9:30 AM - 12:30 PM

Description: You have tried rubbed on and brushed on finishes, now it is time to try using a High Volume/Low Pressure (HVLP) spray system to create a beautiful finish on any wood project. If you are thinking of getting an HVLP sprayer or if you already own one but have not learned how to use it for that perfect finish, then you MUST attend this class. You will learn the details of running these great sprayers, from needles and thinning to cleaning and fine turning for difficult materials.
Tuition: $75.00

Click Here to Request Information

Router 101 -- CLS172 with: Neil Brown
Beginner

Saturday, April 27, 1:30 PM - 4:30 PM

Description: This Course will cover various aspects of using routers, the class will review the router and components, various bits, proper adjustment, operation and safety of the router.
Tuition: $75.00

Click Here to Request Information

Turn A Wall Street II Pen & Letter Opener -- CLS026 with: Gary Schnell
Beginner

Sunday, April 28, 1 PM - 4 PM

Tools Required: Full Face Shield
Description: You can make the great looking pens, ones that are as unique as those available in fine gift shops. Learn the tips and techniques that produce excellent results every time. You will be shown how to cut, drill, square the ends, turn, sand, apply a durable finish quickly and then assemble the parts. Soon you will be making pens for all your friends.
Tuition: $75.00

Click Here to Request Information

VCarve--Working With Inlays -- CLS699 with: Barry Kroft
Intermediate

Monday, April 29, 5:30 PM - 8:30 PM

Prerequisite: VCarve Sessions I-IV
Tools Required: Laptop Computer
Description: Want to take your CNC knowledge to the next level? Learn to enhance you CNC projects and signs with inlays using contrasting colors. In this class you will learn how to prepare your project for inlaying and creating the inlay to fit your project.
Tuition: $85.00

Click Here to Request Information

Hand-Applied Finishes -- CLS273 with: Ken Bangham
All

Tuesday, April 30, 5:30 PM - 8:30 PM

Description: Featuring General Finish's new products. Wipe-on and brush-on both oil and water based finishes for the small-shop woodworker. The instructor will go over almost the entire line of General Finishes products with "how to prepare" instructions along with the advantages of the various products. In this class, you'll find out which finishes work best for particular applications, and how to apply them to achieve a lustrous sheen that begs to be touched and that scoffs at dirt and moisture.
Tuition: $75.00

Click Here to Request Information

A.M. Learn To Turn -- Spindle I -- CLS123 with: Ed Youtz
Beginner

Wednesday, May 1, 9:30 AM - 12:30 PM

Tools Required: Full Face Mask
Description: Cover basic lathe operation, safety, introduction to the use of the roughing gouge, parting tool, spindle gouge and practice exercises. This is a must class for anyone who wants to learn the art of wood turning.
Tuition: $75.00

Click Here to Request Information

P.M. Learn To Turn -- Spindle I -- CLS123 with: Ed Youtz
Beginner

Wednesday, May 1, 5:30 PM - 8:30 PM

Tools Required: Full Face Mask
Description: Cover basic lathe operation, safety, introduction to the use of the roughing gouge, parting tool, spindle gouge and practice exercises. This is a must class for anyone who wants to learn the art of wood turning.
Tuition: $75.00

Click Here to Request Information

HVLP Spray Finisher -- CLS177 with: Neil Brown
Beginner

Thursday, May 2, 5:30 AM - 8:30 AM

Description: You have tried rubbed on and brushed on finishes, now it is time to try using a High Volume/Low Pressure (HVLP) spray system to create a beautiful finish on any wood project. If you are thinking of getting an HVLP sprayer or if you already own one but have not learned how to use it for that perfect finish, then you MUST attend this class. You will learn the details of running these great sprayers, from needles and thinning to cleaning and fine turning for difficult materials.
Tuition: $75.00

Click Here to Request Information

Learn To Turn -- Full Day Of Turning -- CLS146 with: Gary Schnell
All

Saturday, May 4, 9:30 AM - 4:30 PM

Tools Required: Full Face Mask
Description: This class is designed for a full day of turning. In the morning you turn a pen and the afternoon you turn a bowl. Pen Turning Description: You can make the great looking pens, ones that are as unique as those available in fine gift shops. Learn the tips and techniques that produce excellent results every time. You will be shown how to cut, drill, square the ends, turn, sand, apply a durable finish quickly and then assemble the parts. You start with a raw piece of wood, a pen kit with hardware, a lathe, and by the end of class you have a beautiful, functional piece of woodworking that you did yourself. Learn the fundamentals of creating a pen from wood selection, tool selection and proper lathe techniques to finishing. Soon you will be making pens for all your friends. Bowl Turning Description: Each student will turn a bowl. Blanks will be mounted and the outside shaped including a tenon. The blank will be reversed and held in a chuck while the inside is hollowed and smoothed. The blank is finally reversed to turn away the tenon. Students will practice the cuts appropriate for shaping and smoothing the inside and outside using appropriate tools. At the end of class students should be able to turn a bowl on their own.
Tuition: $125.00

Click Here to Request Information

Turning A Bottle Stopper -- CLS203 with: Gary Schnell
Beginner

Sunday, May 5, 1 PM - 4 PM

Tools Required: Full Face Shield
Description: For a great gift idea for someone whether it be a housewarming gift or for that visit to a friend. Turning a bottle stopper is easy once we show you how. Once you start you will not want to stop making them.
Tuition: $75.00

Click Here to Request Information

Making A Skinner Knife -- CLS345 with: Barry Kroft
Beginner

Monday, May 6, 5:30 PM - 8:30 PM

Description: In this class, you'll make a skinner knife from a blank. The class includes wood resawing, blank shaping, knife assembly, and finishing. This class is an excellent introduction to skills needed when making a variety of different types of knives.
Tuition: $75.00

Click Here to Request Information

Dovetail Jig Class -- CLS109 with: Neil Brown
Beginner

Tuesday, May 7, 5:30 PM - 8:30 PM

Prerequisite: Router 101 Or Some Router Experience
Description: Dovetail Jig In this class you learn about the anatomy of the dovetail jig and its application. The templates, router, router bits and guide bushings. A brief discussion about the various other dovetail jigs on the market. The dovetail jig we will use in the class is the Porter Cable 4200 series. Explain the dovetail types and their usage, such as through, half blind, variable space, sliding and box joints. We will discuss stock material and its layout for cutting dovetails. Also we will discuss the safety aspects of using the dovetail jig and its components.
Tuition: $100.00

Click Here to Request Information

A.M. Learn To Turn -- Spindle I -- CLS123 with: Ed Youtz
Beginner

Wednesday, May 8, 9:30 AM - 12:30 PM

Tools Required: Full Face Mask
Description: Cover basic lathe operation, safety, introduction to the use of the roughing gouge, parting tool, spindle gouge and practice exercises. This is a must class for anyone who wants to learn the art of wood turning.
Tuition: $75.00

Click Here to Request Information

P.M. Learn To Turn -- Spindle I -- CLS123 with: Ed Youtz
Beginner

Wednesday, May 8, 5:30 PM - 8:30 PM

Tools Required: Full Face Mask
Description: Cover basic lathe operation, safety, introduction to the use of the roughing gouge, parting tool, spindle gouge and practice exercises. This is a must class for anyone who wants to learn the art of wood turning.
Tuition: $75.00

Click Here to Request Information

Introduction To CNC -- CLS633 with: Neil Brown
Beginner

Saturday, May 11, 9:30 AM - 12:30 PM

Description: This is a introductory course to CNC. Students will learn the basic components of a CNC machine and fundamentals of how to design and machine a simple sign.
Tuition: $85.00

Click Here to Request Information

Working With VCarve, Session I -- CLS636 with: Neil Brown
Beginner

Saturday, May 11, 1:30 PM - 4:30 PM

Prerequisite: Intro To CNC
Tools Required: Laptop Computer
Description: This is a introductory course to VCarve software used for designing projects for CNC. Students will learn the fundamentals of creating and machining a project on CNC.
Tuition: $85.00

Click Here to Request Information

Working With VCarve, Session II -- CLS637 with: Neil Brown
Beginner/Intermediate

Sunday, May 12, 9:30 AM - 12:30 PM

Prerequisite: Working With VCarve Session I
Tools Required: Laptop Computer
Description: This is the 2nd class in the series and will advance the skill level of the student to use VCarve software. In this class the student will learn how to use layers, import files, edit vectors, manipulate text and combine multiple toolpaths into one file. The student will design and carve a picture.
Tuition: $85.00

Click Here to Request Information

Working With VCarve, Session III -- CLS638 with: Neil Brown
Intermediate

Sunday, May 12, 1:30 PM - 4:30 PM

Prerequisite: Working With VCarve Session II
Tools Required: Laptop Computer
Description: This is the 3rd class in the series and will advance the skill level of the student to use VCarve software. In this class the student will learn how to use Transform Function, dimension work, use guidelines, use Tabs, design and machine a gear.
Tuition: $85.00

Click Here to Request Information

Band Saw 102 -- Making A Cutting Board -- CLS279 with: Leeann Behler
Beginner

Monday, May 13, 5:30 PM - 8:30 PM

Tools Required: Safety Glasses And Ear Protection
Description: In this class the student will learn how to make a cutting board using 3 different types of wood. He will learn how to measure, cut, glue, and round off the edges of the board and then put on a finish. By the end of the class the students will have the knowledge to go to his own shop and make many more cutting boards for friends and family.
Tuition: $75.00

Click Here to Request Information

Table Saw 101 -- CLS280 with: Neil Brown
Beginner

Tuesday, May 14, 5:30 PM - 8:30 PM

Description: Table Saw 101 introduces you to basic table saw operation and safety. The class will review the types of table saws, table saw anatomy, how to maintain and tune your saw, proper cross cutting and ripping techniques. This is a hands-on class with proper operation and safety as the main topic.
Tuition: $75.00

Click Here to Request Information

A.M. 7-Class Woodturning Course (Class 1/7) -- CLS271 with: Ed Youtz
Beginner

Wednesday, May 15, 9:30 AM - 12:30 PM

Prerequisite: Completing Spindle I, Introduction To Woodturning
Tools Required: Face Shield
Description: This course follows SPINDLE I and will turn the beginner into a safe, experienced, wood turner. The seven 3-hour classes build the student's understanding and skill through practice on beads and coves, tool sharpening, eggs, matched multiples, a cup and lidded box, plate, and bowls. Weekly projects go home with the student and the method of instruction is demonstration and coaching.
Tuition: $350.00

Click Here to Request Information

P.M. 7-Class Woodturning Course (Class 1/7) -- CLS271 with: Ed Youtz
Beginner

Wednesday, May 15, 5:30 PM - 8:30 PM

Prerequisite: Completing Spindle I, Introduction To Woodturning
Tools Required: Face Shield
Description: This course follows SPINDLE I and will turn the beginner into a safe, experienced, wood turner. The seven 3-hour classes build the student's understanding and skill through practice on beads and coves, tool sharpening, eggs, matched multiples, a cup and lidded box, plate, and bowls. Weekly projects go home with the student and the method of instruction is demonstration and coaching.
Tuition: $350.00

Click Here to Request Information

The Art Of Bowl Turning -- CLS024 with: Ed Youtz
Beginner/Intermediate

Thursday, May 16, 5:30 PM - 8:30 PM

Prerequisite: MUST Have Introduction To Turning Or Spindle I Turning
Tools Required: Full Face Shield Required -- All Other Tools & Materials Provided
Description: Students will practice the cuts appropriate for shaping and smoothing the inside and outside using a bowl gouge and a scraper. At the end of the class students should be able to turn a bowl on their own.
Tuition: $75.00

Click Here to Request Information

Working With VCarve, Session IV -- CLS639 with: Neil Brown
Intermediate

Saturday, May 18, 9:30 AM - 12:30 PM

Prerequisite: Working With VCarve Session III
Tools Required: Laptop Computer
Description: This is the 4th class in the series and will advance the skill level of the student to use VCarve software. In this class the student will learn how to use design 3D project, import 3D objects, manipulate 3D objects, create a toolpath and machine a 3D model.
Tuition: $85.00

Click Here to Request Information

VCarve--Working With Inlays -- CLS699 with: Barry Kroft
Intermediate

Saturday, May 18, 1:30 PM - 4:30 PM

Prerequisite: VCarve Sessions I-IV
Tools Required: Laptop Computer
Description: Want to take your CNC knowledge to the next level? Learn to enhance you CNC projects and signs with inlays using contrasting colors. In this class you will learn how to prepare your project for inlaying and creating the inlay to fit your project.
Tuition: $85.00

Click Here to Request Information

Turning Slim-Line Pens -- CLS026 with: Gary Schnell
Beginner

Sunday, May 19, 1 PM - 4 PM

Tools Required: Face Mask - All Other Tools And Material Will Be Provided.
Description: You too can make the great looking pens. Learn the tips and techniques that produce excellent results every time. You will be shown how to cut, drill, square the ends, turn, sand, apply a durable finish quickly, and then assemble the parts. Learn the fundamentals of creating a pen from wood selection, tool selection and proper lathe techniques to finishing. Soon you will be making pens for all your friends.
Tuition: $75.00

Click Here to Request Information

A.M. 7-Class Woodturning Course (Class 2/7) -- CLS271 with: Ed Youtz
Beginner

Wednesday, May 22, 9:30 AM - 12:30 PM

Prerequisite: Completing Spindle I, Introduction To Woodturning
Tools Required: Face Shield
Description: This course follows SPINDLE I and will turn the beginner into a safe, experienced, wood turner. The seven 3-hour classes build the student's understanding and skill through practice on beads and coves, tool sharpening, eggs, matched multiples, a cup and lidded box, plate, and bowls. Weekly projects go home with the student and the method of instruction is demonstration and coaching.
Tuition: $350.00

Click Here to Request Information

P.M. 7-Class Woodturning Course (Class 2/7) -- CLS271 with: Ed Youtz
Beginner

Wednesday, May 22, 5:30 PM - 8:30 PM

Prerequisite: Completing Spindle I, Introduction To Woodturning
Tools Required: Face Shield
Description: This course follows SPINDLE I and will turn the beginner into a safe, experienced, wood turner. The seven 3-hour classes build the student's understanding and skill through practice on beads and coves, tool sharpening, eggs, matched multiples, a cup and lidded box, plate, and bowls. Weekly projects go home with the student and the method of instruction is demonstration and coaching.
Tuition: $350.00

Click Here to Request Information

Tool Sharpening For Wood Turners -- CLS066 with: Ed Youtz
All

Thursday, May 23, 5:30 PM - 8:30 PM

Tools Required: Face Mask, Bring Your Dull Tools
Description: Bring your dull gouges, skews, parting tools, and scrapers to a class on sharpening wood turning tools. Students will learn how to achieve a sharp edge on all of their tools. Strength and weaknesses of the grinding methods will be discussed. Different bevel angles will be evaluated with students able to try tools with different angles. Students should take home the knowledge of how to sharpen their tools. THIS IS A MUST CLASS FOR ANY WOOD TURNER
Tuition: $75.00

Click Here to Request Information

European Cabinet Class -- CLS390 with: Neil Brown
Beginner

Saturday, May 25, 9:30 AM - 4:30 PM

Description: Students will build a frameless cabinet, locate holes for shelf pins, make the shelf and a flat panel type door and mount the door. This will be done using all Festool tools.
Tuition: $150.00

Click Here to Request Information

Pen Turning A European Pen -- CLS026 with: Gary Schnell
Beginner

Sunday, May 26, 1 PM - 4 PM

Tools Required: Face Mask Required – All Other Tools/materials Provided
Description: You too can make the great looking pens. Learn the tips and techniques that produce excellent results every time. You will be shown how to cut, drill, square the ends, turn, sand, apply a durable finish quickly, and then assemble the parts. Learn the fundamentals of creating a pen from wood selection, tool selection and proper lathe techniques to finishing. Soon you will be making pens for all your friends
Tuition: $75.00

Click Here to Request Information

Turning A Rolling Pin -- CLS029 with: Neil Brown
Beginner/Intermediate

Monday, May 27, 9:30 AM - 12:30 PM

Prerequisite: Introduction To Turning Or Spindle I Turning
Tools Required: Full Face Shield All Other Materials Will Be Provided.
Description: In this class you will take your spindle turning skills to another level. You will learn how to turn evenly flat spindles necessary for rolling pins. You will challenge your spindle turning creativity by turning matching spindles by way of turning 2 matching handles for the rolling pin. You will learn some precision turning, use of turning jigs and use of other non conventional turning tools. At the end of this class you will know how to make your own rolling pin with ball bearings and matching handles. You will know how jigs are used within your turnings. How other tools can be applied to your turnings.
Tuition: $75.00

Click Here to Request Information

A.M. 7-Class Woodturning Course (Class 3/7) -- CLS271 with: Ed Youtz
Beginner

Wednesday, May 29, 9:30 AM - 12:30 PM

Prerequisite: Completing Spindle I, Introduction To Woodturning
Tools Required: Face Shield
Description: This course follows SPINDLE I and will turn the beginner into a safe, experienced, wood turner. The seven 3-hour classes build the student's understanding and skill through practice on beads and coves, tool sharpening, eggs, matched multiples, a cup and lidded box, plate, and bowls. Weekly projects go home with the student and the method of instruction is demonstration and coaching.
Tuition: $350.00

Click Here to Request Information

P.M. 7-Class Woodturning Course (Class 3/7) -- CLS271 with: Ed Youtz
Beginner

Wednesday, May 29, 5:30 PM - 8:30 PM

Prerequisite: Completing Spindle I, Introduction To Woodturning
Tools Required: Face Shield
Description: This course follows SPINDLE I and will turn the beginner into a safe, experienced, wood turner. The seven 3-hour classes build the student's understanding and skill through practice on beads and coves, tool sharpening, eggs, matched multiples, a cup and lidded box, plate, and bowls. Weekly projects go home with the student and the method of instruction is demonstration and coaching.
Tuition: $350.00

Click Here to Request Information

Router 102: Router Table Basics -- CLS277 with: Neil Brown
Beginner

Thursday, May 30, 5:30 PM - 8:30 PM

Tools Required: Bring Hearing Protection, Tools & Material Provided
Description: Students will learn about the different router tables and fence systems available. In addition, instruction will develop an understanding of the advantages of using a router table instead of a hand-held router for specific woodworking functions and about bits that are only used in the router table.
Tuition: $75.00

Click Here to Request Information

Making 2-Color Lighted Acrylic Sign With A CNC--CLS798 with: Gary Schnell
All

Saturday, June 1, 9:30 AM - 4:30 PM

Prerequisite: Completion Of 4-course CNC Sequence Or Good Knowledge Of VCarve And Permission Of Instructor
Tools Required: Laptop Computer With Copy Of VCarve
Description: While CNC woodworking machines typically are used on wood, they also can be used to engrave acrylic material. During this course, using VCarve, we will produce a design of words and a line drawing (such as from clipart). These will be engraved on two 12" x 12" cast acrylic sheets. A wood base to hold the acrylic sheets will be outfitted with two colors of LED lights (type 3528), connectors, on/off switch, and 12V/2A power transformer. You will go home with a working sign that includes a base ready for finished.
Tuition: $165.00

Click Here to Request Information

Pen Turning An Acrylic Pen -- CLS225 with: Gary Schnell
Beginner

Sunday, June 2, 1 PM - 4 PM

Tools Required: Face Mask
Description: We will teach you the art of turning finely crafted Acrylic Pens. These pens are fast becoming favorites all across the country. In this class you will learn the proper techniques for turning, sanding, polishing and assembly. You will leave the class with a beautiful pen in the color combination you select.
Tuition: $75.00

Click Here to Request Information

Introduction To CNC -- CLS633 with: Neil Brown
Beginner

Monday, June 3, 5:30 PM - 8:30 PM

Description: This is a introductory course to CNC. Students will learn the basic components of a CNC machine and fundamentals of how to design and machine a simple sign.
Tuition: $85.00

Click Here to Request Information

Hand Planes In The Workshop -- CLS046 with: Ken Bangham
Beginner

Tuesday, June 4, 5:30 PM - 8:30 PM

Tools Required: Bring One Of Your Hand Planes
Description: Learn how to select, restore, sharpen and use one of the most misunderstood tools in the shop. Various types of hand planes, uses, tuning, sharpening and care will be covered. Bring an old plane to fix up and take home sharp.
Tuition: $75.00

Click Here to Request Information

A.M. 7-Class Woodturning Course (Class 4/7) -- CLS271 with: Ed Youtz
Beginner

Wednesday, June 5, 9:30 AM - 12:30 PM

Prerequisite: Completing Spindle I, Introduction To Woodturning
Tools Required: Face Shield
Description: This course follows SPINDLE I and will turn the beginner into a safe, experienced, wood turner. The seven 3-hour classes build the student's understanding and skill through practice on beads and coves, tool sharpening, eggs, matched multiples, a cup and lidded box, plate, and bowls. Weekly projects go home with the student and the method of instruction is demonstration and coaching.
Tuition: $350.00

Click Here to Request Information

P.M. 7-Class Woodturning Course (Class 4/7) -- CLS271 with: Ed Youtz
Beginner

Wednesday, June 5, 5:30 PM - 8:30 PM

Prerequisite: Completing Spindle I, Introduction To Woodturning
Tools Required: Face Shield
Description: This course follows SPINDLE I and will turn the beginner into a safe, experienced, wood turner. The seven 3-hour classes build the student's understanding and skill through practice on beads and coves, tool sharpening, eggs, matched multiples, a cup and lidded box, plate, and bowls. Weekly projects go home with the student and the method of instruction is demonstration and coaching.
Tuition: $350.00

Click Here to Request Information

Scroll Saw 101 -- CLS181 with: Leeann Behler
Beginner

Thursday, June 6, 5:30 PM - 8:30 PM

Tools Required: Safety Glasses
Description: In this course you will learn to identify the different types of scroll saws, the different types of blades and to understand what blade is used for different materials. You will learn the basic operating principles including, changing blade tension, and blade speed and table angle. You will also learn proper safety including basic shop safety, personal safety and safe procedures using the scroll saw. This is a hands on class where you will learn how to make different types of cuts and make some simple projects that you can take home.
Tuition: $75.00

Click Here to Request Information

Working With VCarve, Session I -- CLS636 with: Neil Brown
Beginner

Friday, June 7, 5:30 PM - 8:30 PM

Prerequisite: Intro To CNC
Tools Required: Laptop Computer
Description: This is a introductory course to VCarve software used for designing projects for CNC. Students will learn the fundamentals of creating and machining a project on CNC.
Tuition: $85.00

Click Here to Request Information

Face-Frame Cabinet Construction -- CLS288 with: Neil Brown
Intermediate

Saturday, June 8, 9:30 AM - 4:30 PM

Prerequisite: Basic Woodworking Skills
Description: One of the most common methods of building cabinets involves a face frame, which is an assembly of vertical and horizontal pieces of wood, typically 1 x 2's. This face frame is attached to the front of the cabinet box (carcass) and the cabinet doors cover the openings in the face frame. Students will also be making a cabinet casing to match the face frame using specific joinery methods to assure solid construction. Students should be prepared for hands-on use of the miter saw, drill press, table saw, router, Kreg Jig, misc. clamps and forstner bits. Skills developed in this class will apply to many other woodworking projects. Students will be able to take the completed assembly home.
Tuition: $150.00
Tuition Notes: Save $25.00 When You Sign Up & Pay For This And The Cathedral Arch Raised Panel Doors Class.

Click Here to Request Information

Turn A Wall Street II Pen & Letter Opener -- CLS026 with: Gary Schnell
Beginner

Sunday, June 9, 1 PM - 4 PM

Tools Required: Full Face Shield
Description: You can make the great looking pens, ones that are as unique as those available in fine gift shops. Learn the tips and techniques that produce excellent results every time. You will be shown how to cut, drill, square the ends, turn, sand, apply a durable finish quickly and then assemble the parts. Soon you will be making pens for all your friends.
Tuition: $75.00

Click Here to Request Information

Working With VCarve, Session II -- CLS637 with: Neil Brown
Beginner/Intermediate

Monday, June 10, 5:30 PM - 8:30 PM

Prerequisite: Working With VCarve Session I
Tools Required: Laptop Computer
Description: This is the 2nd class in the series and will advance the skill level of the student to use VCarve software. In this class the student will learn how to use layers, import files, edit vectors, manipulate text and combine multiple tool paths into one file. The student will design and carve a picture.
Tuition: $85.00

Click Here to Request Information

Flat, Square & Straight-Joint/Plane/Saw - CLS163 with: Neil Brown
Beginner

Tuesday, June 11, 5:30 PM - 8:30 PM

Tools Required: Hearing And Eye Protection
Description: In order to get clean, tight-fitting joints in your woodworking projects, you must be able to accurately flatten, square, and true-up your boards before you even begin the joinery. In this class, you'll learn how the Jointer, Planer, and Tablesaw work together to help you accomplish this fundamental, but necessary task.
Tuition: $75.00

Click Here to Request Information

A.M. 7-Class Woodturning Course (Class 5/7) -- CLS271 with: Ed Youtz
Beginner

Wednesday, June 12, 9:30 AM - 12:30 PM

Prerequisite: Completing Spindle I, Introduction To Woodturning
Tools Required: Face Shield
Description: This course follows SPINDLE I and will turn the beginner into a safe, experienced, wood turner. The seven 3-hour classes build the student's understanding and skill through practice on beads and coves, tool sharpening, eggs, matched multiples, a cup and lidded box, plate, and bowls. Weekly projects go home with the student and the method of instruction is demonstration and coaching.
Tuition: $350.00

Click Here to Request Information

P.M. 7-Class Woodturning Course (Class 5/7) -- CLS271 with: Ed Youtz
Beginner

Wednesday, June 12, 5:30 PM - 8:30 PM

Prerequisite: Completing Spindle I, Introduction To Woodturning
Tools Required: Face Shield
Description: This course follows SPINDLE I and will turn the beginner into a safe, experienced, wood turner. The seven 3-hour classes build the student's understanding and skill through practice on beads and coves, tool sharpening, eggs, matched multiples, a cup and lidded box, plate, and bowls. Weekly projects go home with the student and the method of instruction is demonstration and coaching.
Tuition: $350.00

Click Here to Request Information

Working With VCarve, Session III -- CLS638 with: Neil Brown
Intermediate

Friday, June 14, 5:30 PM - 8:30 PM

Prerequisite: Working With VCarve Session II
Tools Required: Laptop Computer
Description: This is the 3rd class in the series and will advance the skill level of the student to use VCarve software. In this class the student will learn how to use Transform Function, dimension work, use guidelines, use Tabs, design and machine a gear.
Tuition: $85.00

Click Here to Request Information

Cathedral-Arch Panel Cabinet Doors -- CLS017 with: Neil Brown
Intermediate

Saturday, June 15, 9:30 AM - 4:30 PM

Prerequisite: Basic Woodworking Knowledge
Description: You will make two cathedral arch raised panel cabinet doors. This configuration of raised panel doors will include a fixture (template) that will allow you to add decorative arches to the door. You will also learn how to size the panel within its frame to accommodate wood's seasonal movement. The doors will be built using a band saw, templates, and router table, with a constant emphasis on safety. This class will give you the confidence you need for making raised panel doors in your own shop.
Tuition: $125.00

Click Here to Request Information

Pen Turning A Cigar Pen -- CLS026 with: Gary Schnell
Beginner

Sunday, June 16, 1 PM - 4 PM

Tools Required: Full Face Mask Required – All Other Tools/Materials Provided
Description: You can make the great looking pens, ones that are as unique as those available in fine gift shops. Learn the tips and techniques that produce excellent results every time. You will be shown how to cut, drill, square the ends, turn, sand, apply a durable finish quickly and then assemble the parts. Soon you will be making pens for all your friends.
Tuition: $75.00

Click Here to Request Information

A.M. 7-Class Woodturning Course (Class 6/7) -- CLS271 with: Ed Youtz
Beginner

Wednesday, June 19, 9:30 AM - 12:30 PM

Prerequisite: Completing Spindle I, Introduction To Woodturning
Tools Required: Face Shield
Description: This course follows SPINDLE I and will turn the beginner into a safe, experienced, wood turner. The seven 3-hour classes build the student's understanding and skill through practice on beads and coves, tool sharpening, eggs, matched multiples, a cup and lidded box, plate, and bowls. Weekly projects go home with the student and the method of instruction is demonstration and coaching.
Tuition: $350.00

Click Here to Request Information

P.M. 7-Class Woodturning Course (Class 6/7) -- CLS271 with: Ed Youtz
Beginner

Wednesday, June 19, 5:30 PM - 8:30 PM

Prerequisite: Completing Spindle I, Introduction To Woodturning
Tools Required: Face Shield
Description: This course follows SPINDLE I and will turn the beginner into a safe, experienced, wood turner. The seven 3-hour classes build the student's understanding and skill through practice on beads and coves, tool sharpening, eggs, matched multiples, a cup and lidded box, plate, and bowls. Weekly projects go home with the student and the method of instruction is demonstration and coaching.
Tuition: $350.00

Click Here to Request Information

Secrets Of The Skew -- CLS234 with: Ed Youtz
Intermediate/Advanced

Thursday, June 20, 5:30 PM - 8:30 PM

Prerequisite: 7-class Turning Course Or Permission
Description: Skew lovers know it is an efficient tool for completing many jobs. Skew haters know it is likely to ruin any piece of wood it touches. Take this 3-hour class, SECRETS OF THE SKEW, describing what skew lovers know about the care and use of the skew. Practice shaping wood quickly and easily using the skew while learning to avoid the catches that doom projects to the burn pile. Become a skew lover.
Tuition: $75.00

Click Here to Request Information

Working With VCarve, Session IV -- CLS639 with: Neil Brown
Intermediate

Friday, June 21, 5:30 PM - 8:30 PM

Prerequisite: Working With VCarve Session III
Tools Required: Laptop Computer
Description: This is the 4th class in the series and will advance the skill level of the student to use VCarve software. In this class the student will learn how to use design 3D project, import 3D objects, manipulate 3D objects, create a toolpath and machine a 3D model.
Tuition: $85.00

Click Here to Request Information

Learn To Turn -- Full Day Of Turning -- CLS146 with: Gary Schnell
All

Saturday, June 22, 9:30 AM - 4:30 PM

Tools Required: Full Face Mask
Description: This class is designed for a full day of turning. In the morning you turn a pen and the afternoon you turn a bowl. Pen Turning Description: You can make the great looking pens, ones that are as unique as those available in fine gift shops. Learn the tips and techniques that produce excellent results every time. You will be shown how to cut, drill, square the ends, turn, sand, apply a durable finish quickly and then assemble the parts. You start with a raw piece of wood, a pen kit with hardware, a lathe, and by the end of class you have a beautiful, functional piece of woodworking that you did yourself. Learn the fundamentals of creating a pen from wood selection, tool selection and proper lathe techniques to finishing. Soon you will be making pens for all your friends. Bowl Turning Description: Each student will turn a bowl. Blanks will be mounted and the outside shaped including a tenon. The blank will be reversed and held in a chuck while the inside is hollowed and smoothed. The blank is finally reversed to turn away the tenon. Students will practice the cuts appropriate for shaping and smoothing the inside and outside using appropriate tools. At the end of class students should be able to turn a bowl on their own.
Tuition: $125.00

Click Here to Request Information

Turning Pie And Pizza Servers -- CLS029 with: Neil Brown
Beginner/Intermediate

Sunday, June 23, 1 PM - 4 PM

Prerequisite: Introduction To Turning Or Spindle I Turning
Tools Required: Full Face Shield All Other Materials Will Be Provided.
Description: In this class you will take your spindle-turning skills to another level. You will learn how to turn handles for utensils. The resulting high-quality pizza and pie servers will be notable and useful additions to any kitchen. You will challenge your spindle-turning creativity, and the techniques learned will be useful and applicable to numerous other potential turning projects.
Tuition: $75.00

Click Here to Request Information

VCarve-Working With Inlays with: Barry Kroft
Intermediate

Monday, June 24, 5:30 PM - 8:30 PM

Prerequisite: VCarve Sessions I-IV
Tools Required: Laptop Computer
Description: Want to take your CNC knowledge to the next level? Learn to enhance you CNC projects and signs with inlays using contrasting colors. In this class you will learn how to prepare your project for inlaying and creating the inlay to fit your project.
Tuition: $85.00

Click Here to Request Information

A.M. 7-Class Woodturning Course (Class 7/7) -- CLS271 with: Ed Youtz
Beginner

Wednesday, June 26, 9:30 AM - 12:30 PM

Prerequisite: Completing Spindle I, Introduction To Woodturning
Tools Required: Face Shield
Description: This course follows SPINDLE I and will turn the beginner into a safe, experienced, wood turner. The seven 3-hour classes build the student's understanding and skill through practice on beads and coves, tool sharpening, eggs, matched multiples, a cup and lidded box, plate, and bowls. Weekly projects go home with the student and the method of instruction is demonstration and coaching.
Tuition: $350.00

Click Here to Request Information

P.M. 7-Class Woodturning Course (Class 7/7) -- CLS271 with: Ed Youtz
Beginner

Wednesday, June 26, 5:30 PM - 8:30 PM

Prerequisite: Completing Spindle I, Introduction To Woodturning
Tools Required: Face Shield
Description: This course follows SPINDLE I and will turn the beginner into a safe, experienced, wood turner. The seven 3-hour classes build the student's understanding and skill through practice on beads and coves, tool sharpening, eggs, matched multiples, a cup and lidded box, plate, and bowls. Weekly projects go home with the student and the method of instruction is demonstration and coaching.
Tuition: $350.00

Click Here to Request Information

The Art Of Plate Turning -- CLS268 with: Ed Youtz
Beginner/Intermediate

Thursday, June 27, 5:30 PM - 8:30 PM

Prerequisite: Introduction To Turning Or Spindle Turning I
Tools Required: Full Face Mask
Description: Learn how to turn basic plates. Turned plates or platters make attractive household ornaments. They show off the beauty of wood and make a great fruit or candy dish. You will be guided through mounting, designing, and finishing as you create your own small platter from an 8" blank.
Tuition: $75.00

Click Here to Request Information

Festool Farm Table--CLS715 (1/2) with: Neil Brown
All

Saturday, June 29, 9:30 AM - 4:30 PM

Description: In this class you will prepare lumber to construct the table top, apron and legs. Then cut the necessary joinery to assemble these parts. The joinery method for this table will be achieved using the Festool Domino XL. The table will be assembled in a manner that you will easily be able to disassemble it so to take it home then reassemble it.
Tuition: $400.00
Tuition Notes: Tuition Includes 2 Days, As Well As The Materials Used In Construction Of The Farm Table.

Click Here to Request Information

Festool Farm Table--CLS715 (2/2) with: Neil Brown
All

Sunday, June 30, 9:30 AM - 4:30 PM

Description: In this class you will prepare lumber to construct the table top, apron and legs. Then cut the necessary joinery to assemble these parts. The joinery method for this table will be achieved using the Festool Domino XL. The table will be assembled in a manner that you will easily be able to disassemble it so to take it home then reassemble it.
Tuition: $400.00
Tuition Notes: Tuition Includes 2 Days, As Well As The Materials Used In Construction Of The Farm Table.

Click Here to Request Information

Top of Page