WoodRiver - Straight Line Toggle Clamp, 2" x 1", 300 lb. Capacity
This 300-lb. holding capacity, 2" x 1", straight line toggle clamp is used for push clamping operations such as keeping stock tight against fences for drilling or cutting.300-lb. holding...
Items You May Need
Item 172984Model GH-301-AM
Item 144312Model GH-101-A
Item 144313Model GH-12130
Item 143938Model GH-201B
Item 144314Model GH-20235
Item 143935Model GH-12265
Item 143933Model GH-225-D
Item 143937Model GH-12080-U
Item 418559Model STC-HH20
Item 143934Model GH-12050-U
- 300-lb. holding capacity
- 2"-long arm, 1" high on center, 1-1/4" stroke
- Quick clamping action
- Install on jigs and fixtures or movable bases
- 5/16" x 18 adjustable rubber pressure tip
Does what is is built to do.
I used this straight line toggle clamp to build a pen press on a 2 1/2" X 12" oak board. It works perfectly and cost less than $10. a 6"X 1/4" X20 allthread and a T nut completed the adjustable stop end. I use several smaller clamps of this type as hold downs for other projects. Small, strong, affordable.
Solid, reliable jig building
Solid, reliable fixturing and jig building. Don't rely too heavily on the "rated load" for toggle clamps. Those loads are developed in a lab under ideal conditions, and probably without a lot of cycling. I recommend using for loads up to ~1/2 the rated load. Excellent for repetitive clamping and fixtures.
It´s a very useful clamping device
Just what I needed
Easy mounting. Wide range of adjustability. Simple yet effective.
Not strong enough
Though rated at 300 pounds I don't think it can withstand that load. Used 4 as lifts for a workbench (272 pounds total weight), but the angled steel support bent on the first use. Had to change them all with 4 800 pounds from another source