Straight Line Toggle Clamp, 6-3/4" x 3-1/4", 300 lb. Capacity
This 300# holding capacity, 6-3/4" x 3-1/4" straight line toggle clamp is used for push clamping operations such as keeping stock tight against fences for drilling or cutting.300# holding capacity,...
- 300# holding capacity, 6-3/4" x 3-1/4" straight line toggle clamp
- Install on jigs or tool fixtures
- Install on movable base so it can quickly set and engaged to hold your work
- Complete with adjustable rubber pressure tips
Does what is is built to do.
I used this straight line toggle clamp to build a pen press on a 2 1/2" X 12" oak board. It works perfectly and cost less than $10. a 6"X 1/4" X20 allthread and a T nut completed the adjustable stop end. I use several smaller clamps of this type as hold downs for other projects. Small, strong, affordable.
Solid, reliable jig building
Solid, reliable fixturing and jig building. Don't rely too heavily on the "rated load" for toggle clamps. Those loads are developed in a lab under ideal conditions, and probably without a lot of cycling. I recommend using for loads up to ~1/2 the rated load. Excellent for repetitive clamping and fixtures.
It´s a very useful clamping device
Just what I needed
Easy mounting. Wide range of adjustability. Simple yet effective.
Not strong enough
Though rated at 300 pounds I don't think it can withstand that load. Used 4 as lifts for a workbench (272 pounds total weight), but the angled steel support bent on the first use. Had to change them all with 4 800 pounds from another source