$173.99
Improve your current bench by adding a front vise or use this economical hardware to build a new bench from scratch. We're sure you'll find that the rugged castings and precision parts make these economically priced workbench vises a fantastic value. Handle not included.Features:Add a...
Items You May Need
-
$10.99
Details
Improve your current bench by adding a front vise or use this economical hardware to build a new bench from scratch. We're sure you'll find that the rugged castings and precision parts make these economically priced workbench vises a fantastic value. Handle not included.
Features:
- Add a vise to your current bench or to build a new workbench
- Rugged castings and precision parts
- Vise Dimensions (W x L): 10-1/4" x 19-1/4"
- Screw Diameter: 1-3/16"
- Screw Length: 15-1/2"
- Guide Rods Diameter: 3/4"
- (1) WoodRiver - Front Vise Large
- Handle and mounting hardware are not included.
Instructions / MSDS
Articles & Blogs
The Sawdust Chronicles and Phil Lowe at Wood Expo
At the New England Home Show in Boston, Rick Waters of The Sawdust Chronicles, and The Woodcraft Adventures Blog had a chance to learn from Phil Lowe during The Wood Expo 2011.
Reviews
-
Exactly what I needed
Finally have a shop and built my first real bench. This was a perfect addition to my build! Only issue is my own fault from not ordering the quick release. I meant to but didn't pay close enough attention. Used it anyway and works perfectly and quite easy to set up!
-
Not very good at all
I've installed this on a bench I'm currently building. The bench top is a solid 4", with a 1" 3/4 x 8" hard maple apron (in other words, the bench itself is rock solid). This vise is not rigid enough to hold boards securely. The jaw will rack both horizontally and vertically, meaning that only a single edge of the jaw face is ever in contact with the board. This results in very poor holding. As an example; when cutting dovetails the end of the board will vibrate even if the piece is only 3 inches from the top of the jaw face. For the price, this is a very low quality vise and I would not recommend it at all.
-
Works great and very rugged
Installed it on my work bench and works as I expected. I also noticed that there is a small hole to oil the screw, a great plus because by oiling the screw, it will last a lifetime.
-
well built vise
mounted to woodworking bench
-
new table
the instructions were easy to under stand. the table came out great.
-
27 dollars tto much
The near perfect twin of this vice 'elsewhere' for $27 less. I called my local woodcraft guy and its 'just the way it is' I returned two of these for refund. And sadly bought from 'elsewhere'. I would keep my money local for 8-12 dollars but 27 was too much.
-
great vice for the money
I purchased this vice at least 10 years ago and have been using it professionally ever since. I have broken many cheap vices over the years and now only buy the top of the line vices. This vice has held up well and preforms as it should.
