WoodRiver - Clamp Guide Universal Base for Routers and Circular Saws
Ships for Free
This WoodRiver Clamp Guide Universal Base slides accurately in the T-slot found on all WoodRiver Clamp Guides and WoodRiver Guide Rail. Perfect for mounting your circular saw or router to create a...
- 11-1/2" x 6- 3/4" plate with attached guide block for mounting your circular saw or router
- Guide block easily slides in T-slot on WoodRiver Clamp Guides and WoodRiver Guide Rail
- Universal Base can be set down on your WoodRiver Clamp Guides or WoodRiver Guide Rail for plunge cuts
- Works with WoodRiver Clamp Guides or WoodRiver Guide Rail to add guided precision to your circular saw or router
- WoodRiver Clamp Guides and WoodRiver Guide Rail are sold separately
Makes a great track saw
I didn't realize how nicely this worked until I tried a real track saw... and returned it. You can set this up as a zero clearance base and still allow the guard to function. (Just cut away the part that interferes with the guard after plunge cutting the base.) It's very handy to have different lengths of guides available at reasonable cost. This setup just works very well and is reasonably priced.
The base could be a little thicker, but otherwise works as advertised. Used in combination with the edge clamps works very well
Works very well with the clamp guide
I bought this to use with the Woodriver clamp guide. I attached it to my plunge router and I am very pleased with it. All it took was drilling a few holes. They work very well together.
Works As Advertized
I purchased this along with the 36" WoodRiver clamp and together they work very well. You cannot compare this to guides and clamps that are hundreds of dollars, but if you have an occasional use for one this is the one to get.
Works like a charm.
Combined with the clamp guide, this is a great system. Mounted a Makita hypoid circular saw to the base. It's like having a track saw without the big $$s. Makes cutting plywood sheets a breeze. Easy to install. Buying another for my router for dadoes. I highly recommend for the DIY woodworkers. I've never made such square cuts on plywood before.
Not well made at all...
This thing showed up with a visible bow in the plastic plate that your tool mounts on... It's not flat at all. Clamping helped some, but for this money, it should be dead flat. There is also considerable slop in the fitment slot to the guide clamp. Will not affect a circular saw cut as much, but will definitely make a dead straight router cut (such as a shelf dado) very difficult to achieve. Also, there is no mounting hardware for your tools, nor any instructions. You are left totally on your own. Disappointing...
Works with Guide Rail System
The product description says that this is for the Guide Clamps. However, it works with the newer Guide Rail system as well.