JessEm - Twin Paralign Feather Board
Revolutionary new design allows quick and easy parallel height settings, while staying securely positioned in one place. Two additional knobs for quick and easy height settings for different...
You May Also Like
Item 153090Model 04004
Item 153676Model 02230
- Quick and easy parallel height settings
- Stackable for taller stock
- Includes hardware for 3/4" miter slot and 1/4" T-track
- Twin Pack
Flexible Feather Board
Really great idea. Can be mounted on your own custom router guide. Really like the stack idea to increase the height of the featherboard - works well.
Very good product
I was thinking about build my own wood feather boards, but when this two arrived to my shop, I understood that was a good choice!
Greatly improves uniform depth of cut.
I use them on my Jessem router table. They really help stabilize the work piece while allowing me to keep my fingers away from the router bit.
I am using this with my router table which is attached to my table saw. It's the best feather board I've ever used. Compared to other feather boards, it has the greatest width of travel from the miter slot to router bit. It's heavy duty and excellent quality. Can be stacked or used back to back for added safety.
Very Addaptable too very different setup
In a joking way, these feather take awhile setup to double boards.
Easy Set Up Tool
A real sold Tool. Use with 3HP Jet Shaper, Power Matic Band Saw. Easy set up for the double stack configuration. Stays on the mark and will not move once clamped down properly.
These are great help!
I have built my own router table that is capable routing 5 "wooden beams, for example: routing table legs. With capaple I mean that these Jessem fingerbouards fit on top of the 5'' wooden beams into the T track. They fit firmly into the the track when you turn the knobs and do not wobble or come loose. I can keep this size of wood beams under the Jessem finger boards. They press the workpiece firmly on the table top and they are easy adjustable and also reversable that makes the it posible to double the height that fit under the fingerboards. so you can easily adjust the height with the 2 screws. You can even stack them together, that doubles the width. In my case it's perfect for my application. My advice is to buy more than one set. This saves you the trouble of converting single to double. This is the only down side of this product you actualy need more than one set. If you have chairs with curved legs for example, these finger boards may come in handy. On my router table I use these boards in the double finger config to keep my workpiece paper flat on the table and keep it as along the pattern cutter bit to maintain control. You do not have your fingers to come near the bit, and you're sure that your work piece continues to run perpendicular to the router bit and not tip over and ruin your workpiece. Great product.
These are better than most featherboards, they lock in place on the machine and then are ajustable with separate knobs.
Nice solid product but.....
Works as advertised and is well made. It does make it easier to change tension without having to worry about alignment. Just wish it was a little easier to reverse the feather direction.