View a Larger Image of T88 Epoxy, 1/2 Pint

System Three

T88 Epoxy, 1/2 Pint

Item 141935
Model 1100K10
9 Reviews
Write a Review

$26.99

Ships Today!
Shipping Info
Check Local Store for Immediate Availability

T-88 is a high-performance, non-brittle, two-part epoxy adhesive designed to give superior results under adverse conditions. The adhesive may be used without modifications in normally fitted joints, and will cure in any thickness without shrinkage. T-88 is clear amber and becomes...

More Details

Details

T-88 is a high-performance, non-brittle, two-part epoxy adhesive designed to give superior results under adverse conditions. The adhesive may be used without modifications in normally fitted joints, and will cure in any thickness without shrinkage. T-88 is clear amber and becomes virtually invisible when varnished. T-88 exhibits outstanding adhesion and permanence on a wide variety of materials, and is endorsed by leading designers, builders and organizations.
  • Mixed at a ratio of 1:1 by volume
  • Will cure at temperatures as low as 35F
  • Unaffected by water, oil, kerosene, and many other chemicals when fully cured
  • Immune to fungus and rot
  • May be applied to damp wood, provided it is worked well into the surface

Articles & Blogs

Each year the Parkersburg, West Virginia, Humane Society holds a “Walk Your Paws” fundraising benefit. This year, Woodcraft had the woodworking opportunity to be a small part of this community event with the making of a prosthetic leg for a canine costume contest during the event. Keating, a male boxer mix, belonging to Woodcraft employee Nancy Miller, won a 1st place prize basket of treats with his pirate’s outfit, complete with a handcrafted willow wood pegleg.

Read More >

I recently read a drill press review where the writer complained that there was no place on the machine to store the chuck key.

Read More >

Reviews

9 Reviews
Write a Review
  1. by on

    Great product...

    I used T-88 for building my wooden aircraft ribs for my Pietenpol Aircamper. It is easy to use, mixes 1:1 and when dried it is rock solid. I put one of my glue joints into my bench vice to do a destructive test on the joint and gussets. The wood splintered long befor the glue joint even thought of breaking away. Great stuff.

  2. by on

    great glue for load bearing structures

    I use this glue in my therapy harp. Other glues will creap under load at higher temperatures. I use this glue to attach the soundboard to the soundbox and to attach the harp neck to the pillar.

  3. by on

    Superior epoxy!

    I have used many brands of epoxy and found T88 System Three to be superior for almost any material including wood (even oily ebony), metals, concrete, etc. I don't mess with success -- just use the best!

  4. by on

    Great Product!

    This is the best epoxy on the market IMHO, I use it for inlaying mother of pearl in wood on boxes, picture frames etc. I tried a few other types and they all fall short compared to system three T88.

  5. by on

    Strength and workability

    Mixes very well and flows out beautifully for even distribution. Amazingly strong after cure. Another fine product that's available through Woodcraft.com!

  6. by on

    what I was toldto use on my project

    what we use,[...] thanks

  7. by on

    [...]

    use in boat building

  8. by on

    Best structural epoxy you can buy!

    I have found T-88 to be perfect for durable, high-stress applications. I often use milled and chopped fiber as additives to enhance its strength even more. I have used many types of epoxies over the last 20 years, and T-88 is the one I always come back to.

  9. by on

    Epoxy Glue

    I tried this product but was not impressed. The set up time was too long and the price was no bargain.

Compare With