Trendler Metal Products - Swivel, Flat, 1" Thick
Designed for bar stools, swivel chairs, and television turntables, this flat, 1" thick swivel can also be used as a giant lazy Susan. Overall size is 7" x 7". Heavy 12-gauge steel plates run...
Item 03M53Model 110113
Item 03M52Model 100105
Item 124300Model 9C
Item 02Z31Model 4C
Item 02Z51Model 12C
Item 02Z21Model 3C
Item 02Z41Model 6C
Designed for bar stools, swivel chairs, and television turntables, this flat, 1" thick swivel can also be used as a giant lazy Susan. Overall size is 7" x 7". Heavy 12-gauge steel plates run smoothly on a full ball-bearing race. Mounting slots on corners (5-1/4" center-to-center) accept round head screws or bolts.
- 1"-thick, 360° flat swivel
- Heavy 12-gauge steel
- Mounting slots on corners
- Full ball-bearing race
- High Resistance
Instructions / MSDS
just needed for t-shirt printing
used in printing logos on t-shirts
I would order this product again
Was satisfied over all
Flat Swivel for chairs
A little stiff while new, but after several days of use, will loosen. Easy to install - Keep out of weather - the roller balls will rust Heavy-duty enough for chairs -
Well built swivel
My old chair swivel gave out after years of use. This new one bolted on without any problem and works well.
OK, quality is good.
No big deal. It's just a turntable
the plate has sharp edges. Had to file t
Had to file down the edges before installment.
I WILL buy this product again and again!
Exact fit replacements for my barstools in my buisness. Better quality than original equiptment.
Perfect for Heywood-Wakefield rev. tops
Like the original swivel it replaced, this has the word Chicago as part of the company name stamped on it, so I'm certain it is by the successor company. Slotted design means there are no holes to drill, important in repairing collectable furniture. As others have mentioned, the product is initially "stiff" which can lead to the need for work-arounds during installation, but the bottom line is that this is a top-quality product from another era and we are lucky to still have it available.
I would buy this again.
replaced worn out swivel bar stools.
Great buy- excellent value!
I used this to replace worn kitchen bar stool mechanisms. They work smoothly and I'm very satisfid.
I acquired an ooooold papasan chair with a swivel built into its base. The swivel, by design, had a grand total of 6 balls in it. Your replacement was an exact fit, no holes to drill, and much sturdier than the original. All that and a great price as well. Thanks!
Good overall product, seems pretty durable. It is a little harder to turn than I had hoped.
Just as advertised-heavy duty and stiff.
I used this product to make a working turn table for reloading bullets.
does what it's suppose to do beautifully
I purchased this to be used as a T.V. swivel stand. The product works great. At first I thought that the swivel was too tight. But after 1st use it loosened up just enough to work perfectly.
Did not suit my purpose (didn't turn freely enough) and had to return it, but would certainly consider this part for different applications. Very sturdy.
Very heavy duty as described. I used it to replace a worn out bar stool swivel. This is better than the original. It came very stiff but I am certain will loosen up with use. Instruction also tells you what to do if it is too stiff.
well made, looks like it should last
ordered wrong part, needed one with tapped holes. would like to return part
Exactly what I wanted/needed!
This is a high quality, sturdy swivel installed to replace one on an antique rotating coffee table. Amazingly, the screw holes matched perfectly with what was there. Super easy installation. Swivel is smooth with the right level of stiffness. I couldn't be happier.
This swivel did exactly what I wanted.
Exactly as descibed
replaced a broken swivel on a stool. Fit right in.