Soss - Barrel Hinge for 3/4" Panels 1 pc
It is easy to install this invisible non-mortise barrel hinge used for wood panels 3/4" thick. Just drill the proper size hole and tap the hinge in flush. Secure mounting in the wood door or panel...
Item 158430Model 1159
Item 145380Model BRASS PLATED PAIR
Item 130635Model 130635
Item 151321Model 1411 PB/LS
Item 16R59Model 2014 PB/FP
Item 158421Model 1013
Item 159061Model 159061
- Non-mortise invisible hinge
- For panels 3/4" or thicker
- 14mm mounting hole
- Solid brass
- Sold individually
We have used these before on the same product that is made once a year at this time.
Nice clean look when installed
The hinges work great. Mounting hole diameter and placement is critical. It's difficult to find a Fostner bit or drill for 14mm hole.
Nice hinge for boxes
I have been building some wooden boxes lately and have been using these barrell hinges as another method of installing the lids. They work fine so far but they are finnicky to install and require a 14mm bit to drill the mounting hole. I bought a 14mm forstner bit and for some reason it is a different size 14mm than the 14mm plug cutter I have is. Is not all 14mm supposed to be the same size? Otherwise, I am satisfied with these Soss hinges and will continue to buy more as needed.
I found this hinge required hammering to install and had to be perfectly aligned on the first try because it was too tight to adjust. I used a 14 mm drill bit as suggested.
One of the greatest inventions ever!
I have used these everywhere from yacht cabinetry, to wainscot in bars with secret tables, that folded out from some panels.
Don't forget to order 35/64" bit
The only problem is it requires the 14mm or 35/64" drill bit which they do mention but is difficult to find and a 1/2" drill bit won't do it.