Clesco - Sanding Set, 12 piece
This extra long drum sanding set turns your drill or drill press into a mini spindle sander. Use it to clean up bandsaw marks on contour cuts, smooth rough edges, or sand the inside surfaces of...
You May Also Like
Item 07O42Model SS012032-120A12
Item 07O41Model SS008032-120A12
Item 07O52Model SS024032-120A12
Item 07O51Model SS016032-120A12
- Turns your drill or drill press into a mini spindle sander
- Clean up bandsaw marks on contour cut
- Smooth rough edges
- Sand the inside surfaces of deep drilled holes
- 12-piece set
An expensive not so bad solution
Just too much wobble in the drill press, really would rather have a inexpensive spindle sander for what I do, but still a much better solution than hand sanding etc.
Great little sanding drums!
Great to use with a homemade base with a cutaway and dust collecting chamber.
These drums are good for small jobs. I used them with my Shopfox Drill press with the oscillating setting. They do pretty good, but they do not replace a good spindle sander. Part of that is probably doe to the limitations of the drill press. The sleeves also slip on the drums without shimming or doublestick tape.
Perfect for detail sanding
I use the small sanding drums in a flexible drill press shaft to sand intarsia parts.
I use them in a table top drill press. They save time on odd shapes.
Good of infrequent use
This little product is good for the solving the little problems. It is not a replacement for a spindle sander if that's what you really need. I doubt the units will last for more than 10 hours of work, but good if you don't need to use it heavily.
I used the product to sand down the interior radius of a half round table that I made. It worked well, and I can see myself using this item often.
I use the sanders to sand the inside of bowls I build as a hobby.
T wouldbuy again
Great sanding in tight places sanding sleaves are easy to change
Good for light use
Worked really well for very light sanding. Used in both drill press and on hand held drill. Couldn't apply much pressure to get a good sanding though or would slip off spindle. One of those tools that is nice to have but not a must have.
A great inexpensive alternative to purchasing a spindle sander if you only want it to do a quick easy job.
Toy maker delight
I make wooden antique car replicas. This makes sanding on the cars extremely easy
great set of drums
the varied diameters are perfect for a luthier
Very handy addition for my drill press.
easy to setup and use. different sizes and grits are very handy for lots of projects. box says they also make a 3" model but I didn't find it on the website.
Mounted in a drill press on my shop-smith and they work great. I am using them to sand the curved edges of 1 1/2" thick stock.
This product performs well.
Used the drums to sand curves and tight radius on cabriole legs. Works great. Multiple size drums fit all I needed.
I would buy this product again
can be used in a number of tools