Sauers - Red Oak, Rift Cut 4' x 8' Veneer Sheet, 3M PSA Backed
This item has an additional shipping charge
Whether you're a hobbyist or a furniture maker, you'll be delighted with the result you get with this all natural wood veneer by Sauers & Co. Pre-sanded and ready to finishBook-matched with...
Item 404405Model RDOAK-FC-PSA
Item 404423Model WHTOAK-RFTC-PSA
Item 404406Model RDOAK-QCFLK-PSA
Item 404366Model BECH-FC-PSA
Item 404194Model RDOAK-RIFT 10MIL
Item 404377Model CHRY-QC-PSA
Item 404391Model MAH-QC-PSA
Item 153280Model 878084006085
Item 153286Model 878084001233
Item 404373Model CDR-AMTC-PSA
- Pre-sanded and ready to finish
- Book-matched with precision matched spliced lines
- Consistent color
- Flexible, so it's easy to apply
Applications include furniture repair and manufacture, countertops and shelves, marine applications, and endless architectural applications. Edgebanding is all natural wood veneer that has been pre-sanded, backed, and pre-glued.
Red Oak (Quercus rubra): Reddish-brown in color, Flat cut. North America.
See 'Ships Direct From Manufacturer' link for warranty and return details.
Due to the nature of wood movement, shrinkage and expansion are possible. Please measure each piece carefully before starting any project.
Wood is a product of nature, and as such, no two pieces are alike to start with, while the same wood growing in different locales can vary greatly even though it is the exact same species.
Thin Stock. The thin stock is cut to size from quality, kiln-dried stock. Dimensions are +/- 1/8" of size listed.
Carving and Turning Blocks. Blocks are sawn to +/- ¼" of size listed.
Plywood. Sizes are nominal. Dimensions are +/- 1/8" of size listed.
Shipping / Billing InformationThis is a custom made product and is non-returnable. Once placed, order cannot be cancelled.
- Your order will ship in approximately 5 business days except for custom orders which may take a couple of weeks.
- This product ships direct from the manufacturer and is considered special order.
- Your account will be charged when you place your order.
- Express or overnight shipping is not available for this product.
- Ships by Ground to the 48 contiguous states.
- Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.
Returns allowed only due to manufacturers defect and must be in an unprocessed condition. Defect-related returns must be received within 30 days.If you have a defect issue, contact Woodcraft Supply customer service @ 1-800-535-4482 for details.
When returning product, please include the invoice number or customer number and refer to the back of the invoice for shipping instructions.
If purchased at a Woodcraft Store, please return the item directly to the store where your purchase was made.
Great way to get
The 3M PSA backed veneer is a great product when used to "re-surface" kitchen cabinet wooden face frames. If one pays attention to detail, the final results will be rewarding. Prepare the old surfaces to be covered by removing any loose or peeling finishes by scraping or lightly sanding, then wipe down with mineral spirits to remove "dust". The trick is to be sure the old frames are clean, smooth and sealed so that the "peel and stick" veneer will properly adhere. I found using a sharp pair of scissors was the best way to rough cut the new individual rail and stile strips, then final trim with a sharp utility knife once the veneer is installed and "scraped". Don't be in any hurry to stain or seal the product UNTIL the 3M adhesive has set for at least 12 hours. Take your time and all involved will be happy with the results.