Prefinished Drawer Bottom 1/4" x 24" x 48"
Making drawers? Take a tip from the pros and use pre-cut components to cut your project construction time and quite possibly save a few dollars as well. Drawer bottoms are 1/4" cabinet grade birch...
You May Also Like
Drawer Sides 8x60
- 1/4" cabinet grade birch
- Pre-finished on one side
- Cut your project construction time
Please measure each piece carefully before starting any project.Plywood sizes are nominal. Dimensions are +/- 1/4" of size listed.
I would buy this product again and again
Just cut it to size and install easy.
Good Idea, but....
Worked fine as a drawer bottom.[...] Nice and square so the bottoms were easy to fit.
Product came severely bowed due to being only 1/4" thick and finished on only one side. Not sure why everyone has 1/4" plywood for use as a drawer bottom. I ended up laminating two pieces together to form 1/2" ply, and widening the dado on the drawer sides to accept the larger size. This worked out quite nicely. I would not recommend using 1/4" ply as a drawer bottom.