View a Larger Image of Talon Chuck, 1-1/4" x 8 TPI

Oneway

Talon Chuck, 1-1/4" x 8 TPI

Item 142883
2 Reviews
Write a Review
Out of Stock
Shipping Info
  • Ships for Free

    • Designed for smaller lathes, this new chuck from Oneway Manufacturing is loaded with features. Only 3-1/2" in diameter and weighing 3.4 lbs., it features one-handed single key tightening, it's self-centering and its patented profile jaws provide maximum holding power. Both the scroll...

    This kit includes the following items:

    • Talon Chuck without Insert
    • Talon Chuck Insert, 1-1/4" x 8 TPI
    More Details
    This product is currently unavailable for purchase.

    Details

    Designed for smaller lathes, this new chuck from Oneway Manufacturing is loaded with features. Only 3-1/2" in diameter and weighing 3.4 lbs., it features one-handed single key tightening, it's self-centering and its patented profile jaws provide maximum holding power. Both the scroll and base jaws are hardened for long life and smooth operation while the body is nickel plated to resist rust and wear. Comes with #2 Jaw set which will grip a spigot from 1-5/8" to 2-7/8" and expand in a dovetailed recess sized from 2" to 3-3/8". Includes screw center, operating key, T-handle hex wrench, removable threaded adapter and instruction booklet.



    • 3-1/2" in diameter
    • Weight 3.4 lbs
    • Features one-handed single key tightening
    • Self-centering
    • Comes with #2 Jaw set

    Articles & Blogs

    Quickbowl

    You might say, what’s the big deal about turning a bowl in about 3 hours time, anyone can do that! Well in this project we will instruct you on how to turn a bowl while it’s green, dry it, finish it, all in just a few hours. John Wolf (from the Turning Tuesday’s woodworkers) shows us how it’s done starting out with a piece of “green” curly maple saved from the scrap pile.

    Read More >

    Reviews

    2 Reviews
    Write a Review
    1. by on

      Owned one of these for years.

      I purchased one of these years ago and it has held up extremely well. It holds anything you can fit the jaws around. I am upgrading from a 10" midi lathe to a 16" lathe and am getting the bigger insert for it. I'm sure it will last for years to come. Well made product from performance to fit and finish.

    2. by on

      I just works

      I bought the Oneway Talon to go with a ten inch midi-lathe that my projects quickly outgrew so I moved on to a sixteen inch lathe. But I have not outgrown the Oneway Talon. This chuck has taken anything and everything I have thrown at it and I know I have overloaded it more than once. It operates very smoothly, is very precise, grips everything well, and in general is an absolute pleasure to use. I purchased a larger and heavier but less expensive chuck from another vendor to handle my bigger projects but I got what I paid for. The larger and less expensive chuck turned out to be less capable than the smaller and lighter Oneway Talon and will almost certainly end up being replaced with a Oneway Stronghold chuck in the near future.

    Compare With