Pre-Selling Special Orders Now!
This Item Will Not Be Available After Monday April 4, 2017... Estimated Delivery July, 2017
OneTIME Tool®– Mini Gap Gauge This is the OneTIME Tool Mini Gap Gauge Only.Say Goodbye To Tedious Trial and Error Dado Setups. The only way to describe dado setups is an “on again, off again affair.” Mount the blades and chippers in your table saw, add some shims to guestimate the...
Details
OneTIME Tool®– Mini Gap Gauge
This is the OneTIME Tool Mini Gap Gauge Only.
Say Goodbye To Tedious Trial and Error Dado Setups. The only way to describe dado setups is an “on again, off again affair.” Mount the blades and chippers in your table saw, add some shims to guestimate the desired width, tighten the arbor nut, make a test cut, repeat. And repeat again. Oh yeah, try not to drop anything into the deep pile of dust inside your saw! Is it any wonder dado setups are dreaded?
Dado Setup Solution, Woodpeckers New DSF Paired With Gap Gauge. The Dado Setup Fixture (DSF) enables woodworkers to find the perfect dado stack combination before installing it in the table saw. When using the DSF along with the Woodpeckers clever Gap Gauge measuring device; dado setups are a “can’t miss” operation.
First, you need to determine the physical thickness of the material, like plywood, that you want to fit into the dado. The Gap Gauge is a perfect solution to accurately determine the correct width.
Second, use the Gap Gauge along with the DSF to match your setup. The beauty of the DSF is that it mimics the mounting of your dado set in the table saw. But using the DSF is faster and easier because it’s on your bench top or in a vise. And the Gap Gauge virtually eliminates the need for trial and error test cuts.
Simple Tools Yield Great Results. The Dado Setup Fixture has a 5/8” bronze “arbor” and a threaded knob that tightens the dado stack configuration just as your saw’s arbor nut would. The arbor can accommodate dados up to 15/16” thick.
Securing the base of the DSF is easy and enables you to torque the knob to compress the dado stack, replicating the internal workings of your table saw. Shoulders milled on the long edges make for easy vice installation. The base also has two, 3/8” holes with matching locating pins.
Just use the DSF base as a drill guide to perfectly space the holes on your bench or other work surface. The DSF even comes with optional bushings that perfectly match the hole pattern of Festool’s Multi-Function Table (MFT).
Gap Gauge Has A Range Of Uses. The genius of the Gap Gauge is that by simply gauging either the thickness of material or inside dimension of a joint, the opposite end of the Gap Gauge is perfectly set to the required size for the other mating half of the joint.
As examples, you can gauge an existing dado for a precision fit, or pare a tenon to perfection by measuring a mortise using the fingered side of the tool. Then, use the solid edge to gauge your tenon. Woodpeckers also offers the Gap Gauge Mini for taking measurements of small gaps ranging from 1/8” to 1 1/8”.
Ordering Options to Suit Your Needs. You can separately order any of the three products– Dado Setup Fixture #132363, Gap Gauge #132361 or Gap Gauge Mini #132360. Gap Gauge Set #132362. Alternately, you can order Woodpeckers Deluxe Kit #132364 and get all three products at a savings.
Your Credit Card will be charged at the time you place the order.
Pre-Order Now, Don’t Delay!
Like all their OneTIME Tools, the Dado Setup Fixture and Gap Gauges are scheduled for a one-time production run and are only made to order in our shop near Cleveland, Ohio. Deadline to order yours is Monday April 3, 2017. Once orders are filled, the tool will be retired from their product line. Order yours today! Delivery is scheduled for July, 2017.
Made In U.S.A.
This is the OneTIME Tool Mini Gap Gauge Only.
Say Goodbye To Tedious Trial and Error Dado Setups. The only way to describe dado setups is an “on again, off again affair.” Mount the blades and chippers in your table saw, add some shims to guestimate the desired width, tighten the arbor nut, make a test cut, repeat. And repeat again. Oh yeah, try not to drop anything into the deep pile of dust inside your saw! Is it any wonder dado setups are dreaded?
Dado Setup Solution, Woodpeckers New DSF Paired With Gap Gauge. The Dado Setup Fixture (DSF) enables woodworkers to find the perfect dado stack combination before installing it in the table saw. When using the DSF along with the Woodpeckers clever Gap Gauge measuring device; dado setups are a “can’t miss” operation.
First, you need to determine the physical thickness of the material, like plywood, that you want to fit into the dado. The Gap Gauge is a perfect solution to accurately determine the correct width.
Second, use the Gap Gauge along with the DSF to match your setup. The beauty of the DSF is that it mimics the mounting of your dado set in the table saw. But using the DSF is faster and easier because it’s on your bench top or in a vise. And the Gap Gauge virtually eliminates the need for trial and error test cuts.
Simple Tools Yield Great Results. The Dado Setup Fixture has a 5/8” bronze “arbor” and a threaded knob that tightens the dado stack configuration just as your saw’s arbor nut would. The arbor can accommodate dados up to 15/16” thick.
Securing the base of the DSF is easy and enables you to torque the knob to compress the dado stack, replicating the internal workings of your table saw. Shoulders milled on the long edges make for easy vice installation. The base also has two, 3/8” holes with matching locating pins.
Just use the DSF base as a drill guide to perfectly space the holes on your bench or other work surface. The DSF even comes with optional bushings that perfectly match the hole pattern of Festool’s Multi-Function Table (MFT).
Gap Gauge Has A Range Of Uses. The genius of the Gap Gauge is that by simply gauging either the thickness of material or inside dimension of a joint, the opposite end of the Gap Gauge is perfectly set to the required size for the other mating half of the joint.
As examples, you can gauge an existing dado for a precision fit, or pare a tenon to perfection by measuring a mortise using the fingered side of the tool. Then, use the solid edge to gauge your tenon. Woodpeckers also offers the Gap Gauge Mini for taking measurements of small gaps ranging from 1/8” to 1 1/8”.
Ordering Options to Suit Your Needs. You can separately order any of the three products– Dado Setup Fixture #132363, Gap Gauge #132361 or Gap Gauge Mini #132360. Gap Gauge Set #132362. Alternately, you can order Woodpeckers Deluxe Kit #132364 and get all three products at a savings.
Your Credit Card will be charged at the time you place the order.
Pre-Order Now, Don’t Delay!
Like all their OneTIME Tools, the Dado Setup Fixture and Gap Gauges are scheduled for a one-time production run and are only made to order in our shop near Cleveland, Ohio. Deadline to order yours is Monday April 3, 2017. Once orders are filled, the tool will be retired from their product line. Order yours today! Delivery is scheduled for July, 2017.
Made In U.S.A.
"What are our ONE-TIME TOOLS? They’re the tools that our partners at Woodpeckers plan to run once. Often these are tools we ourselves would like but can’t put in full production. The process is simple; they build a couple, take some pictures and open a 10-20 day window for others to jump on the production run. Once they know how many to make, they get them done and move on to something else.
By buying a One-Time Tool, you will own a limited run precisely machined tool that will make you the envy of all your woodworking friends, and you have a tool that will be used for generations. These tools are proudly made in the USA.""""""
"
By buying a One-Time Tool, you will own a limited run precisely machined tool that will make you the envy of all your woodworking friends, and you have a tool that will be used for generations. These tools are proudly made in the USA.""""""
"
