OneTime Tool 12-in-1 Tool, Inch
Carry 12 Tools In Your Apron Pencil Pocket!What Could Be Handier? You just can’t beat the utility of Woodpeckers latest OneTIME Tool. And you’ll never find a multi-function tool like the 12-In-1 Tool with the precision and quality you’ve come to expect from Woodpeckers. Truly, 12 Tools...
What Could Be Handier? You just can’t beat the utility of Woodpeckers latest OneTIME Tool. And you’ll never find a multi-function tool like the 12-In-1 Tool with the precision and quality you’ve come to expect from Woodpeckers.
Truly, 12 Tools Built Into A Simple, Single Tool. The first 12-In-1 Tool was patented in 1927 and made by the Hutchison Manufacturing Company of Nashville, TN. Woodpeckers 12-In-1 Tool performs the same dozen functions with accuracy you can rely on:
- 12" Rule
- Try Square
- Bevel Gauge
- Depth Gauge
- Marking Gauge
- Angle Transfer Tool
- Diameter Gauge
- Inside Measure Rule
Plus, the 3/4" width can be used as a gauge block for equipment setup and it serves as an accurate straight edge.
Locked-In Precision for Use as Square, Depth Gauge, T-Square and More. The all stainless steel 12-In-1 Tools are produced one at a time on state-of-the-art CNC equipment in Woodpeckers own shop near Cleveland. Notches are precisely machined into the top of one rule and bottom of the other rule. When nested and clamped together using the knurled knob screw, the 12-In-1 Tool is used as a square, T-Square and Depth Gauge with great precision. The two ruler sections also lock-in for use as a 12” ruler and Marking Gauge.
Even More Features. The 12-In-1 Tool has several features involving the tool’s laser engravings. One rule has 1/16" imperial scales and the other 1/32" scales. For setting the tool to commonly used angles, engravings are provided for 30°, 45° and 60° across one ruler blade. At the round end of one rule, degree marks are engraved in 15° increments from 0° to 90° and can be set for either right or left-handed use.
When used as a compass a hole in one end is used for a nail pivot point. On the other end a diamond shaped cutout captures a pencil point, scribe tool or knife when set as a compass or marking gauge. A machined notch is cut into the edge of the round end of the ruler for aligning both measurement and degree scales.
One Of The Most Clever Small Tools You’ve Ever Seen. Woodpeckers 12-In-1 Tool has more wide-ranging functions than perhaps any other multi-purpose tool. Every woodworking shop and carpenter toolbox should have one.
Pre-Order Now, Don’t Delay!
Your Credit Card will be charged at the time you place the order.
Like all their OneTIME Tools, the 12-in-1 Tool is scheduled for a one-time production run and is only made to order in their shop near Cleveland, Ohio. Deadline to order yours is Monday September 4, 2017. Once orders are filled, the tool will be retired from their product line. Order yours today! Delivery is scheduled for December 2017.
Made in U.S.A.
By buying a OneTIME Tool, you will own a limited run precisely machined tool that will make you the envy of all your woodworking friends, and you have a tool that will be used for generations. These tools are proudly made in the USA.