System Three - Gloss Epoxy MirrorCoat Varnish 1-1/2 Pints
MirrorCoat is a pourable, self-leveling bar and tabletop coating. It works well on many surfaces such as wood, ceramics, plaster, masonry and some plastics. MirrorCoat cures to a glossy, smooth...
Item 872799Model 0530K40
Item 143154Model 0500K42
Item 873911Model 0530k46
Item 873912Model 0530K44
Item 173678Model 3159S06
Item 169314Model 0570k46
- 1-1/2 Pint kit covers approximately 4.8 sq. ft
- You can actually create “floating” objects in your finish by embedding them between coats
- Perfect for bar and table tops, decoupage, small clocks and crafts
- Super hard finish
- Has more depth than any other topcoat
Instructions / MSDS
Articles & Blogs
First Timer with this finish
This finish is great! The only thing I'd add is FOLLOW THE INSTRUCTIONS! I assumed the plaque I was coating with this finish was level because I assumed my work bench upon which the project was sitting was lever, I didn't check it with a level and the finish was slightly higher on one side after it cured. Also, I was skeptical about using a torch to lightly heat the finish to remove any air bubbles as the instructions stated, but it worked brilliantly!
get rid of bubbles
to get rid of bubbles, after each coat go over area with burnsamatic torch. hit it real fast back and forth and that will pop all bubbles
This application was a fretboard coating for a fretless bass guitar, hard clear glossy surface. Product works as advertised
I would buy this product again
Dose the job
Shines Like New Money
Easy to understand instructions but failed to mention if sealer or what type was required on bare wood. I think a sealer may have prevented the excessive bubbles I experienced.