Bird's-eye maple (Acer saccharum) is so named because the figure resembles small bird's eyes. Bird's-eye figure is a phenomenon that occurs within several kinds of wood, most notably in hard maple. The figure is reportedly caused by unfavorable growing conditions for the tree. The sugar maple attempts to start numerous new buds to get more sunlight, but with poor growing conditions the new shoots are aborted, and afterward a number of tiny knots remain. Bird's-eye maple is frequently sold in veneer form, but solid lumber is available as well. Being tiny knots, the bird's-eye figure is most noticeable and pronounced on flatsawn pieces of lumber. It turns well on a lathe, allowing it to be shaped into decorative canes, bottle stoppers and pens. It is used in refined specialty products, such as in automobile trim, both in solid form and veneer, boxes and bowls for jewelry, thin veneer, humidors, furniture inlays, handles, guitars, and pool cues. When working with bird's-eye wood, it is advisable to use sharp tools so as to prevent grain tear-out. This thin stock is cut to size from quality, kiln-dried stock sanded on both sides. Dimensions are +/- 1/8". Grain runs with the longest dimension. USA.
- Distinctive "eye" pattern
- Finishes well
- Dimensioned lumber
Due to the nature of wood movement, shrinkage and expansion are possible. Please measure each piece carefully before starting any project.
Wood is a product of nature, and as such, no two pieces are alike to start with, while the same wood growing in different locales can vary greatly even though it is the exact same species.
Thin Stock. The thin stock is cut to size from quality, kiln-dried stock. Dimensions are +/- 1/8" of size listed.
Carving and Turning Blocks. Blocks are sawn to +/- ¼" of size listed.
Plywood. Sizes are nominal. Dimensions are +/- 1/8" of size listed.