B | Flux 1 HP 110 v Canister Dust Collector
Shipping Fee of $150.00
Laguna’s B|Flux has a sleek design and power to match. You won’t have to fumble with a steel band to mount your lower bag, the B|Flux comes with a patented SnapBand that makes changing the bag a breeze. Unlike most 1 HP units the B|Flux feels solid and has a low dB rating. The...
The B|Flux:1 comes standard with a 1 micron canister providing filtration of 99.97% of particles between 0.2 to 2 microns and features 17.2 square feet of polyester spun bond pleated filter to ensure maximum airflow. Its hand crank cleaning prevents clogging of the filter.
- Motor HP: 1 HP, Single Phase, 110V
- Amps: 8.4
- Hertz: 60 Hz
- RPM: 3450
- Motor mounted direct switch
- Nominal CFM: 650
- Max Static Pressure (inches of water): 4.86”
- Impeller / Fan Size: 9”
- Impeller Material: Steel
- Inlet Diameters: 4” x 1 ports
- Filtration efficiency: 0.2 - 2micron @ 99.97%
- Canister cleaning: Manual hand crank
- MERV Rating: 12
- 2” ball casters
- Machine Weight: 71 lbs.
- Shipping Weight: 77 lbs.
- Assembled Dimensions (L x W x H): 29” x 14.8” x 50.4”
Shipping / Billing Information
This product ships direct from the manufacturer:
- Your order will ship in approximately 7-21 business days.
- This product is considered special order. Your account will be charged when you place your order.
- Express or overnight shipping is not available for this product.
- Ships by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.
- Liftgate and Residential Delivery is covered with the excess weight fee, and the freight company will call the day before delivery to set up a time at no charge to you.
If purchased at a Woodcraft Store, please return the item directly to the store where your purchase was made.
New woodworking machines sold by Laguna Tools carry a two-year warranty effective from the date of shipping. Laguna bandsaw blades' welds are backed by their 1-yr manufacturer's warranty. Machines sold through dealers must be registered with Laguna Tools within 30 days of purchase to be covered by this warranty. Laguna Tools guarantees all new machine sold to be free of manufacturers’ defective workmanship, parts and materials. Laguna Tools will repair or replace, without charge, any parts determined by Laguna Tools, Inc. to be a manufacturer’s defect. They require that the defective item/part be returned to Laguna Tools with the complaint. In the event the item/part is determined to be damaged due to lack of maintenance, cleaning or misuse/abuse, the customer will be responsible for the cost to replace the item/part, plus all related shipping charges.
For warranty repair information, call 1-800-332-4094.
Overall this unit is excellent. I have a decent sized shop but I prefer not to route ducts all over the place so I have one of these dedicated to my saw and considering another for my router and bandsaw. I have zero complains on its ability to extract dust from my Sawstop. Some complain about the intake being at the top, but I think it makes a lot of sense when you couple this with an Oneida cyclone, which I have done. I used it for about a year before doing the cyclone and either setup works, I just prefer the cyclone as it is easier to empty the canister and the filter/bag on the vac barely sees anything but the smallest of dust. That does add another 250 to the cost and a slightly bigger footprint, but it's not necessary. Overall, I recommend this DC to anyone.
I love the B-Flux
I have a small shop, Needed a good dust collector for my Sawstop. I have it set up to connect to my Router table, jointer, bandsaw, planer and drum sander. I use single point hook up. I run one device at a time, this works great. YES You can flip the Motor assembly so it is an UP FLOW. The holes and fittings are there. Just look at the device when you assemble it. Not Hard to do at all. Works well, nice filter. Easy to change bag. I remove the filter and work from above. I do wish I had a bigger space, we all Need MORE POWER.
Great for a small shop
I have a small shop. Permanently connected to my SawStop, but have ports available to connect to my Router table, planer, bandsaw and jointer. Just have to juggle the ducts/tubing. Great improvement over a shop vac. Yes you can assemble with the intake coming from below the fan, or above. Your choice. Physical size just perfect, and Dust collection and noise both greatly improved.
Nice unit, but i wish inlet port was better designed for airflow. Why does a 1hp unit have a inlet facing up?