Knife Rivet Countersink B For WoodRiver Knife Kit
Countersinks can be drilled with an appropriately sized brad point bit, but it can be difficult to center the countersink hole over the previously drilled rivet holes. The WoodRiver® Knife Rivet Countersink Bit will perfectly align the countersink hole and rivet body hole resulting in...
- Make perfectly centered rivet head countersinks with ease
- Steel construction
- Eliminates misaligned countersink and rivet body holes
- Countersink: 21/64"
- Bore: 3/16"
- (1) Knife Rivet Countersink Bit A For WoodRiver Knife Kits - 21/64" Countersink - 3/16" Bore
Instructions / MSDS
Don't waste your money
I make knife scales as a hobby. Both counter sinks A and B are expensive and do not work properly in my opinion as I have made handles for almost all of Woodcrafters models. However, all knife blanks sold by Woodcrafters are of extremely excellent quality and recommended.
It is the perfect size.
I would rather the fine point to be a twist bit.
Good Bit, but Rusty
I ordered both the A and B versions of this bit and this one came with rust pits on it. I know this isn't the bits fault, but the worker filling my order could have noticed the rust and gave me a different one. I noticed it before I pulled it out of the box. The bits work fine.