View a Larger Image of Wood Inlay Strip No. 17 - 1/4" x 36" - 2 Piece
description text
  • View a Different Image of Wood Inlay Strip No. 17 - 1/4" x 36" - 2 Piece
  • Default

Sauers

Wood Inlay Strip No. 17 - 1/4" x 36" - 2 Piece

Item 149617
Model 878084003169

$28.99

Sauers® Wood Inlay Strips are the premium inlay bandings chosen by professional woodworkers to add a distinctive touch to furniture, boxes, and restoration pieces. Quality construction aids installation and reduces time in the finish room. Installation is easy: simply rout a groove to...

Details

Sauers® Wood Inlay Strips are the premium inlay bandings chosen by professional woodworkers to add a distinctive touch to furniture, boxes, and restoration pieces. Quality construction aids installation and reduces time in the finish room. Installation is easy: simply rout a groove to the proper width and depth with a straight cut router bit and glue the banding in place. Made in the USA from domestic and exotic woods. In your choice of widths from 1/8" to 1/2" wide, 36" long, approximately 1/28" thickness.

Features:

  • Inlay adds a distinctive touch
  • Use in furniture, boxes, and restoration pieces
  • Easy to install
  • Domestic and exotic wood
  • Made in the USA
Specifications:
  • Thickness (approximate): 1/28"
  • Width: 1/4"
  • Length: 36"
What's Included:
  • (1) Wood Inlay Strip - No. 17 - 1/4" x 36" - 2 Piece
Notes:
  • Wood is a product of nature, and as such, no two pieces are alike to start with, the same wood growing in different locales can vary greatly even though it is the exact same species.
  • Due to the nature of wood movement, shrinkage and expansion are possible. Please measure each piece carefully before starting any project.
  • Cut from quality, kiln-dried stock. The grain runs with the longest dimension.
  • Thin Stock is sawn to +/- 1/8" of the listed size.
  • Carving and Turning Blocks are sawn to +/- 1/4" of the listed size.
  • Plywood sizes are nominal, the dimensions are +/- 1/8" of the listed size.
  • Larger blocks are sawn to +/- 1/4" of the listed size.
  • Smaller blocks are sawn to +/- 1/8" of the listed size.
  • Spindle stock, or stock that is 1-1/2" - 2" wide is sawn to +/-1/8" of the listed size.

Reviews

3.0 out of 5 stars
2 Reviews
  1. 5.0 out of 5 stars
    by on

    very easy to make it perfect

    looks great inlayed around edges of pic frames, etc.... I prefer alittle oversize to get a perfect fit. A little sand paper on edges is all it takes for perfection.

  2. 1.0 out of 5 stars
    by on

    Only purcahse if width doesn't matter

    Inlay banding is often used for...inlaid banding. Relatively simple process: rout a slot, glue in the banding. Imagine my surprise when none of the pieces fit into the slot(S). $75 worth of banding all over-sized by as much as 0.037". If you insist on purchasing from Woodcraft, don't catalog order; go to a store -- with mic or vernier in hand.

Compare With

Top of Page