General Finishes - HP Polyurethane Top Coat, Flat, Quart
General Finishes High Performance Polyurethane water based finishes are designed to be the best. They are formulated to resist foaming, prevent sagging and resist running like ordinary water based...
You May Also Like
Item 147896Model WBQT
Item 159167Model QQG
• Extremely tough durable finish
• Contains UV stabilizers
• Suitable for floors and countertops
• Resists foaming, sagging and running
Instructions / MSDS
Articles & Blogs
For the second year in a row, local “makers” had the opportunity to use their creativity for a good cause – the Mid-Ohio Valley Habitat for Humanity. The ReStore ReDesign Contest encouraged entrants to upcycle furniture pieces for the chance to win more than $700 in prizes and have their project move on to the annual fundraising event, Destination Design.
This topcoat was very easy to apply and the flat finish was just beautiful. I applied 3 coats and it created a durable and professional finish. It dried amazingly fast, only took about 5 minutes between coats. Cleanup was quick. Will definately use again.
My search is over
I sprayed this finish straight out of the can with a 1.4 needle hvlp gun and it is the best finish I've used so far. Goes on really smooth, levels out nice, and doesn't run if sprayed on vertical surfaces. I was able to lay down a finish that I'm extremely happy with on some hard maple for a table top. The finish seems very durable. I've used some other Gen fin WB Polys before, but I prefer this Flat or Matte finish. It doesn't shine, gives a good amount of grain pop, and very nice to the touch. Now if only I can figure out how to get a gallon or so of this stuff.