GRR-Ripper Complete System
The GRR-Ripper® Complete is an all-in-one package for ultimate control, precision, and safety. The GRR-Ripper® provides downward and inward pressure, keeping both sides of the cut parallel to the blade. This prevents the workpiece from straying from the rip fence, virtually eliminating...
The GRR-Ripper® Complete is an all-in-one package for ultimate control, precision, and safety. The GRR-Ripper® provides downward and inward pressure, keeping both sides of the cut parallel to the blade. This prevents the workpiece from straying from the rip fence, virtually eliminating kickback. The package includes a GRR-Ripper® Advanced 3D Pushblock and the following advanced features: 1/8" Leg Accessory, Gravity Heel Kit, Handle Bridge Kit and Deflector/Connector.
The 1/8" Leg allows you to rip thin strips down to ⅛”, safely and repeatably. Excellent for edge banding, models, or decorative inlays. The Gravity Heel Kit comes with 5 dynamic sacrificial heels and mounting hardware. The sacrificial heels automatically retract mid-board, and drop down to hook the tail end of the workpiece. The specially formulated plastic material allows them to be cut, providing support to prevent tearout. The Stabilizing Plate provides more stabilizing surface by adding two additional points of contact. It keeps the workpiece locked tight to the fence and parallel to the blade. The Adjustable Spacer provides additional gripping surface for controlling larger workpieces. Adjustment slots provide clearance for exposed router bits while maintaining a flat edge on the fence. The Handle Bridges distribute downward pressure evenly for greater control and safer cuts. The Deflector / Connector acts as a barrier between your hands and spinning blades while deflecting chips and debris.
- More than 30 uses on table saws, router tables, jointers and bandsaws
- Fully adjustable
- Downward pressure stabilizes work piece
- Inward pressure against fence minimizes kickback
- Forward pressure feeds stock consistently through cut
- Includes GRR-Ripper advanced and every accessory, a complete system
- Model Number: GR-281
- Product Depth: 8.5"
- Product Width: 9""
- Product Height: 7"
- (1) GRR-Ripper - Main body
- (1) 1/2" Leg
- (1) 1/4" Leg
- (1) Center leg
- (1) Handle
- (1) Balance support
- (1) Hardware pack
- (1) All Accessories: Stabilizing Plate, Adjustable Spacer, Deflector / Connector, Handle Bridge Kit, Gravity Heel Kit, 1/8” Leg
Articles & Blogs
MICROJIG MICRODIAL Tapering Jig Video–Presented by Woodcraft
GRR-Ripper Gravity Heel AccessoryItem 861222
GRR-Ripper System - Model GR200Item 820434
Handle Bridge Set For Microjig GRR-RipperItem 146915
1/8" Side Leg for GRR-Ripper SystemsItem 845406
GRR-Ripper Model GR-200 Double Pack with Two Handle Bridge SetsItem 855385
GRR-Rip Block - Smart PushblockItem 856321
Sure-Grip Push Blocks - Bright Orange - 2 PieceItem 162880