WoodRiver - DWV PVC Pipe To 4-Inch Hose Dust Collection Adapter Fitting
Unique adapter allows you to connect most 4” dust collection hoses to most of the light-weight 4” DWV (drain, waste, vent) PVC pipe commonly available at home-centers.Features: • Connect most 4”...
Item 151294Model 151294
Item 151292Model 151292
Item 162294Model YW1122
Item 154575Model YW1073
Item 162287Model YW1044
Item 163730Model YW1062
Item 154576Model YW1027
Item 153982Model YW1134
Item 162299Model YW1131
• Connect most 4” dust collection hoses to common 4” DWV PVC pipe
• Left-hand threaded 4” end fits inside most 4” dust collection hoses
• Smooth smaller diameter end slides inside most 4” DWV PVC pipe
• Smooth side outside diameter approximately 4.000 inches
• ABS material for rigidity and durability
Only works with their hose
The left hand thread does not work on other popular 4 inch hoses. So beware. Otherwise it would be useful as it saves you a clamp
Useless with SDR-35 AND useless with the woodcraft plastic blast gates (Model YW1104)
Spec says: Smooth side outside diameter approximately 4.000 inches So, this is for the heavier white Sch40 pipe. As most of us use SDR-35 (3000# crush / 117psi pressure), lighter and cheaper than Sch40, this these WILL NOT work.
Works well for Woodcraft system componen
It works well for most hose connections but doesn't fit all PVC pipe or machine dust ports. Costs add up if you require a lot of these connectors; so try to select dust collection hose, pipe and ports that do not require many of these.
Bad size description
I wanted to attach a flexible hose to a gate of a dustcollector. The hose side fits well, the gate side not, because it is exactly the same size as the gate. I wished the online description had exact measurements, ideally in cm for outer and inner diameters of this fitting.
Adapter for shop dust collection system
Good place to start. Adaptation necessary. Adapter does NOT fit snugly into any 4" PVC pipe product. Get out the duct tape and wrap to increase diameter for a snug fit. If you use PVC pipe for its smooth wall, you must consider how to eliminate static charge build up. Refer to JET book on dust collection.
Exactly what I needed
Used this to connect flexible hose to PVC. Worked great.
Used in 4" thinwall pvc sewer/drain pipe
Needed to use silicone on adapter for a tight fit with the pipe.
Excellent, well designed fitting
Adapts nicely from 4"ID PVC to 4"hose. Connection at hose end could not be easier; simply screw the fitting into the hose. Connection at PVC end may require warming the PVC with a heat gun and massaging it to fit snugly, not too tight and not too loose. Other reviewers have criticized this product; in fact, I almost passed on ordering it. I bought 1 to see for myself, and I am reordering. This is a fine product.
Don't waste your money...
Don't waste your money! I bought 4 of these fittings, and within three weeks, they were all broken. For a "compression" fitting, I expected the material to be more structually sound. When I attempted to push the fitting onto a collection port, the plastic exploded into multiple pieces. Same story with the others. Completely unsatisfied with this purchase. Woodcraft should be ashamed for stocking this WORTHLESS item.
Don't buy this adapter!
This is a poor fitting adapter at the hard connection end. I just hope the ABS cement will fill in the space and compensate for the poor fit of the adapter!