Unlock Your CreativityWith the most innovative technology right in your home, you can unlock the creativity within your whole family. Easy to use straight out of the box, you’re ready to start building anything you need, anything you want, or anything the world has been waiting forEasy...
Details
Unlock Your Creativity
With the most innovative technology right in your home, you can unlock the creativity within your whole family. Easy to use straight out of the box, you’re ready to start building anything you need, anything you want, or anything the world has been waiting for
Easy To Use
It is easy to build objects with the Dremel on-board software and color touchscreen, which enables a preview of each model before you build. Additionally, the Dremel 3D Idea Builder comes equipped with a pre-installed extruder (the part where the filament comes out and builds your model), unlike other 3D printers that require you to install it yourself. This makes setup as simple as plugging in your printer, and you’re ready to build! Along with easy-to-use software, you can start turning your ideas into models and projects in minutes.
Touchscreen Panel
Your Dremel 3D Idea Builder is fully operational even without hooking it up to a computer! With the full color touchscreen, you can select models to build, and can control your print process with Start, Stop, and Pause buttons… and much more. The touchscreen even displays helpful information and the printing status of your model!
General Information
Extruder: Single extrusion
Extruder temperature: Up to 230°C /397°F
Operating Interface: 3.5” full color IPS touch screen
Maximum Build Volume: 9” x 5.9” x 5.5”
Layer Thickness: 4 mil | 0.004 inches 100 microns | 0.10 mm
SD Card (not included): Up to 32GB in size /3D20 will not work with SD cards larger than 32GB
Internal Storage: 4GB
Weight (without spool): 19.5 lbs.
Dimensions (HxWxD): 15.7” x 19.1” x 13.2”
Filament
ONLY use Dremel PLA filaments
Filament: 1.75mm PLA (Biodegradable/Renewable)
Storage: Do not unpack until filament is needed
Store at room temperature: 16-29° C / 60 - 85° F
Store in a dry environment
Software
Dremel 3D20 comes with complimentary software. This application converts your 3D digital files into buildable model files.
Windows Requirements: Dremel Software runs on 32 and 64-bit Operating Systems Windows Vista or later
MAC OS X Requirements: Dremel Software runs on Mac OS X 10.8 or later
Ubuntu Requirements: Dremel Software runs on Ubuntu 14.04 or later
Hardware
A PC with the below minimum requirements will be required to run the Dremel Software Processor: Multi-core processor - 2 GHz or faster per core
System RAM: 2 GB
Screen Resolution: 1024x768
USB Port
Video Graphics Card to support OpenGL 2.1 or later
Electrical
3D20 input rating: 120V, 60Hz, 1.2A
Environment
Room Temperature: 16-29° C (60 - 85° F)
Level workspace
Dry workspace environment
Warranty
One year warranty for non-commercial use
60 day warranty for commercial use
A minimum 15% Restocking Fee will apply to the return of CNC machines & 3D Printers. Customer pays return shipping charges.
With the most innovative technology right in your home, you can unlock the creativity within your whole family. Easy to use straight out of the box, you’re ready to start building anything you need, anything you want, or anything the world has been waiting for
Easy To Use
It is easy to build objects with the Dremel on-board software and color touchscreen, which enables a preview of each model before you build. Additionally, the Dremel 3D Idea Builder comes equipped with a pre-installed extruder (the part where the filament comes out and builds your model), unlike other 3D printers that require you to install it yourself. This makes setup as simple as plugging in your printer, and you’re ready to build! Along with easy-to-use software, you can start turning your ideas into models and projects in minutes.
Touchscreen Panel
Your Dremel 3D Idea Builder is fully operational even without hooking it up to a computer! With the full color touchscreen, you can select models to build, and can control your print process with Start, Stop, and Pause buttons… and much more. The touchscreen even displays helpful information and the printing status of your model!
General Information
Extruder: Single extrusion
Extruder temperature: Up to 230°C /397°F
Operating Interface: 3.5” full color IPS touch screen
Maximum Build Volume: 9” x 5.9” x 5.5”
Layer Thickness: 4 mil | 0.004 inches 100 microns | 0.10 mm
SD Card (not included): Up to 32GB in size /3D20 will not work with SD cards larger than 32GB
Internal Storage: 4GB
Weight (without spool): 19.5 lbs.
Dimensions (HxWxD): 15.7” x 19.1” x 13.2”
Filament
ONLY use Dremel PLA filaments
Filament: 1.75mm PLA (Biodegradable/Renewable)
Storage: Do not unpack until filament is needed
Store at room temperature: 16-29° C / 60 - 85° F
Store in a dry environment
Software
Dremel 3D20 comes with complimentary software. This application converts your 3D digital files into buildable model files.
Windows Requirements: Dremel Software runs on 32 and 64-bit Operating Systems Windows Vista or later
MAC OS X Requirements: Dremel Software runs on Mac OS X 10.8 or later
Ubuntu Requirements: Dremel Software runs on Ubuntu 14.04 or later
Hardware
A PC with the below minimum requirements will be required to run the Dremel Software Processor: Multi-core processor - 2 GHz or faster per core
System RAM: 2 GB
Screen Resolution: 1024x768
USB Port
Video Graphics Card to support OpenGL 2.1 or later
Electrical
3D20 input rating: 120V, 60Hz, 1.2A
Environment
Room Temperature: 16-29° C (60 - 85° F)
Level workspace
Dry workspace environment
Warranty
One year warranty for non-commercial use
60 day warranty for commercial use
A minimum 15% Restocking Fee will apply to the return of CNC machines & 3D Printers. Customer pays return shipping charges.
Compare With
-
$799.99
