8 x 2-1/4 HighPoint XT Square Drive Woodworking Screws, Flat Head, Yellow Zinc, 500-Piece

Extra Torque (XT) means just that! Commonly available screws will actually break around 25-30 inch/lbs. While that may be fine for drywall or other

light duty applications, woodworking demands something better. HIGHPOINT extra torque woodworking screws are engineered for tough

applications and offer almost twice the torque values of other screws! Special attention is given to design as well as the heat treating process to

produce one tough screw! With a super sharp point and deep, biting threads, these screws will cut their way into just about any common hardwood

you will use. There are many advantages of a Square Drive design. Bits are less likely to jump out of the recess and allow you to use more driving

torque. Square Drive offers a positive “stick-fit” which tends to stay on screwdriver bit tip, which is handy starting screws overhead or from other

difficult angles. The positive fit means your bits will last longer and you are less likely to damage the screw. If you have driven screws that fall off the bit

then you understand what we mean! These screws are unplated and are coated with a specially formulated dry lubricant which reduces driving torque

and offers a minimal amount of corrosion resistance. Color may vary due to variations in the heat treating process and may exhibit shades of grey,

brown or black. Dry lube finish fasteners are recommended for interior applications only. Not recommended for use in ACQ® treated lumber.

HIGHPOINT XT woodworking screws size #6 have a #1 Square Drive recess and #8 have a #2 Square Drive recess.

• Twice the torque of other screws
• Yellow zinc plating
• Superior heat treat process
• Super sharp point
• Square Drive