WoodRiver Dust Connection
4" ID Union Fitting for Dust Collection System
Quickly connect and disconnect various dust collection fittings with 4" OD ports like elbows, Y's, T's, and blast gates. Tapered 4" ID opening on both ends provides friction union between many of the dust collection fittings used to create a system for chip removal.Features:Joins dust...
Quickly connect and disconnect various dust collection fittings with 4" OD ports like elbows, Y's, T's, and blast gates. Tapered 4" ID opening on both ends provides friction union between many of the dust collection fittings used to create a system for chip removal.
- Joins dust collection fittings with 4" OD ports
- Quickly connect Elbows, Y’s, T’s, and Blast Gates
- Durable, abrasion resistant construction
- Size: Tapered 4" ID opening at both ends
- Overall Length: 3-3/4"
- Construction: Durable Polypropylene Plastic
- (1) WoodRiver Dust Connection™ - 4" ID Union Fitting
It's correctly labelled.
This is useful for connecting rigid pipes, Y branches, right angles, blast gates to each other. Since these devices have a 4" outside diameter, the union fitting product has a 4" inside diameter.
This fitting makes it easy for my to switch my Jet dust collector from my band saw, to the table saw, to the dust hood etc with messing with feeding fitting into the hose and securing it with a clamp. I do need a variety of fitting for each piece of equipment, but I do not have hoses going all over the place in my shop.
4" Union Fitting
Product is correctly labeled 4" I.D. (Inside Diameter). Perfect friction fit on dust collection fittings. No clamps or tape needed
O.D. means OUTside diameter
I bought this because I needed a piece with the outside diameter of 4". This piece has an INSIDE diameter of 4". Product is incorrectly labelled.
WoodRiver Dust ConnectionItem 153982
WoodRiver Dust ConnectionItem 144541
WoodRiver Dust ConnectionItem 152674
WoodRiver Dust ConnectionItem 163731
WoodRiver Dust ConnectionItem 85O10
WoodRiver Dust ConnectionItem 85O14