View a Larger Image of 1/2" x 16" 2-wire Hairpin Leg, Raw Steel
Item 870212
Model DIY-HL-12-16

DIY Hairpin Legs - 1/2" x 16" 2-wire Hairpin Leg, Raw Steel



Save 25% Now Through February 28, 2019

Items You May Need

Compare With


Turn your slab or standard tabletop into a mid-century modern design with the addition of hairpin legs. Made in the USA, these raw steel hairpin legs are easy to install with several screws, but offer a high-end design look.

Each leg is made from cold rolled steel and lightly coated with a rust-resistor before it leaves the manufacturer. A simple cleaning with acetone will prepare the surface for painting if you choose. Otherwise, applying a clear sealer or wax is recommended. Unless sealed or painted, raw steel hairpin legs are not recommended for outdoor use.

Hairpin legs are easy to install with the L-shaped bracket. Four 3/16" screw holes are predrilled in the bracket. Standard #6 x1-1/4" sized screws (not included) are typically used for installation, but you’ll want to adjust the screw size based on your unique project.

Ideally sized to create coffee tables, end tables, or side tables. Add to a standard tabletop, wooden slab or anything you can imagine to create a unique table.


• Size: 1/2" diameter x 16" H

• 2-wire design

• Raw steel (lightly oiled)

• Install with screws (not included)

• Sold individually

Top of Page