Woodpeckers One-Time Tool Offers Marking Gauges & Components

Comments (0)

Woodpecker’s has a new line-up of Marking Gauge products available at Woodcraft.  Marking gauges are best for cutting razor-thin lines that help align your chisels and hand saws for improved accuracy.  If you hand cut dovetails, tenons, mortises, lap and most other joints, a good marking gauge belongs on your workbench.  Sliced scribe lines not only provide a more accurate reference line but also help create crisp hand-cut joints.

Woodpeckers newest One Time Tools are precision-machined, wheel-type marking gauges made for uncompromising accuracy.  They’re precise, extremely rigid and easy to control.  You can quickly configure the scribe wheels and spacers for single or double marks spaced in 1/16” increments from 1/8” to 1/2″.  The tool-steel wheels are stationary so if you need a fresh cutting edge, just loosen the screw, rotate the wheel to a sharp section, tighten the screw and you’re ready to go.  To re-sharpen simply hone the flat face to bring it back to its original sharpness.  The tail end of the bar is hollow with a threaded cap allowing for storage of extra scribe wheels and spacers.

The fence of these marking gauges are CNC machined from billet, aircraft-grade aluminum and reamed for a perfect fit with the precision ground 3/4″ diameter bar.  The 6” marking bar is paired up with a 3-1/2” long fence and the 24” bar comes with a 6-1/2” long fence.  With either of these fences you’ll have substantially more contact area when compared with common round-head gauges.  And with only 3/8” of fence below the bar, interference when guiding along rabbeted edges is also reduced.

True appreciation of the craftsmanship put into these tools will be obvious the moment you hold one in your hands.  Their size, shape and weight all come together to give you the control needed to make consistently accurate, razor-sharp scribe lines for your woodworking joinery.

These Marking Gauges are available with a red anodized aluminum or polished stainless steel bar.  Each bar is accurately engraved with an inch or metric scale.  A Spare Parts Kit is also being offered.

Marking Gauges

Machined in their shop just outside Cleveland, Ohio. Made in U.S.A.

Like all Woodpeckers One Time Tools, these new Marking Gauges are only made to order.

What are our ONE-TIME TOOLS?  They’re the tools that our partners at Woodpeckers plan to run once.  Often these are tools we ourselves would like but can’t put in full production.   The process is simple; they build a couple, take some pictures and open a 10-20 day window for others to jump on the production run.  Once they know how many to make, they get them done and move on to something else.

By buying a One-Time Tool, you will own a limited run precisely machined tool that will make you the envy of all your woodworking friends and you have a tool that will be used for generations.  These tools are proudly made in the U.S.A.

0 Comments

Write Comment

Write Comment

You must be logged in to write a comment. Log In

Top of Page