Using Polyurethane Glue

Comments (0)
Using Polyurethane Glue

Begin by lightly dampening the wood with a spray bottle. This opens up the pores of the wood and speeds the curing of the glue. Spread a moderate amount of glue into the joint. (This stuff foams to three times its original volume). 

Using Polyurethane Glue

After three to four hours, the glue will be fully cured. The hardened foam can then be easily removed with a chisel or scraper.

Using Polyurethane Glue

Copyright 2004 August Home Publishing. Used with permission of publisher.

This article originally appeared in Workbench Magazine June 2003.

Glue & Adhesives

View All Glue & Adhesives

Scrapers

View All Scrapers

0 Comments

Write Comment

Write Comment

You must be logged in to write a comment. Log In

Top of Page