Using Casters In The Woodshop

Comments (0)
Using Casters in the Woodshop

Our heavy duty casters feature non-marring polyurethane wheels that will support weights in excess of what most hobby woodworkers are apt to load onto them--each caster is rated at 300 pounds, which gives a max load per four corner project adding up to well over 1000 pounds.

The beauty of these casters is their ease of installation; two styles offer simple four hole mounting plates, so they can be screwed directly onto the base of whatever is being built. The other type bolts directly to the machinery being made mobile. These sturdy casters are ideal for items you need to get out of the way quickly when they're not in use, and return to use quickly. This makes the casters ideal for items like assembly benches where loads may vary from 10 pounds to well over 300 pounds within a five minute span.

Assembly benches for any particular shop need to be sized to the shop's types of projects: if you never build anything larger than a milk crate, then a 4' x 2' rolling assembly cart is apt to be the most useful, and to consume the least space. If you turn out larger projects on a fairly regular basis, think about making an assembly cart 2-3' wide and 6-8' long, depending on your needs. Make the top of 3/4" plywood, the ends of 3/4" plywood, and if the cart goes over 4' long, put in a center insert of 1/2" plywood. The bottom needs to be 3/4" plywood. Some places use particleboard, which is cheaper, though less durable over the long term. Add a pair of regular casters at two corners and a pair of locking swivel casters at two end corners, and you're ready to go. I like to cheat a bit and put in a shelf that is about halfway between the top and the bottom on small assembly carts that are near normal bench height. For smaller (lower) assembly tables, this is not possible, but the cart itself is usually longer and wider, providing more space for tool and fastener storage.

For assembling finished items, or items with delicate surfaces, cover the assembly table with carpeting. Remnants work well. Attach with staples for easy removal when dirty.

Making these particular casters more suitable for quick and easy movement is the use of ball bearings, and the swiveling action is also a big help. The fact that the swivel locks down as the wheel itself is locked is another help, guaranteeing that the bench won't scoot out from under whatever you're loading onto it…or assembling on it.

Low furniture style dollies may also be built with the casters, using the great load limit of these models: you then have easy movement of tools or materials on a permanent or part-time basis. Also possible is a cart to hold clamps--no matter how many clamps you get, you won't overload that cart by weight. Give some thought to an A frame shape, with 1" or 3/4" pipe as cross members inside the As, where clamps can be hung, or leaned, until needed. I like an open cut A, with the center member left in place, of inexpensive 3/4" plywood (not MDF or particle board here). That gives you a spot to hang small clamps and to pop on those little spring clamps that are so hard to store they usually end up in a drawer and half forgotten.

There's really not much limit on what you can make mobile with these casters, except your imagination. Four or six can be set up to handle off-sized tools as mobile bases when you can't find a base to fit--as is the case with many tools, such as saws with unusual fence configurations, shapers and other tools.

Heavy-Duty Casters

View All Heavy-Duty Casters


Write Comment

Write Comment

You must be logged in to write a comment. Log In

Top of Page