Tips & Tricks: Scrollsaw bowl press

Comments (0)

This article is from Issue 108 of Woodcraft Magazine

I make bowls by scrollsawing pieces from thinner stock and then laminating the layers together. To facilitate gluing up the stack, I made a press from two plywood disks connected with 1/2" bolts, washers, and wingnuts. The bottom disk is solid, but the top disk has an opening big enough for my hand to slip through. This opening allows me to clean up any glue squeeze-out before it has a chance to harden.

—Linda Fitzgerald, Westport, Massachusetts


Write Comment

Write Comment

You must be logged in to write a comment. Log In

Top of Page