Tips & Tricks: Better Clamp Purchase on Machine Tables
Comments (0)
This article is from Issue 105 of Woodcraft Magazine.
I frequently find myself clamping fences and other fixtures to my table saw, bandsaw, and other machine tables. Unfortunately, the cast iron webbing on the underside of the tables can make finding solid footing for clamps tricky. To remedy this, I fit and epoxied filler blocks of 3/4" plywood between the webbing ribs to create flat surfaces that are much more clamp-friendly.
—Rick Lombardi, Dublin, Ohio
Write Comment
You must be logged in to write a comment. Log In
0 Comments