Pumpkin Stack Growth Chart

Comments (0)

Each year, Woodcraft corporate employees bring their children and grandchildren to the office, and we have a special Halloween Trunk or Treat for them. Tasked with painting something for a photo op for the party, I opted for a stack of nearly-toppling pumpkins and a slinky black cat with measurement markings along the side. This fun, new display will become something we use from year to year, and the little kiddies can see how much they’ve grown. 


Ben Bice from our Product Development Team got two 3/4" x 48" birch plywood boards for the project. Using a jigsaw, he cut around the shape I sketched on the bottom half for the first three pumpkins and cut down the top board to 18" wide.  He saved the scrap wood for later use. He sanded the edges lightly so there wouldn’t be any splinters before I began painting it.

Ready to Paint

Mixing "Mountain Mist" - 1 part Roanoke Rain + 1 part Galvanized

Shop Paint

Colors mixed and ready to start painting!

Explore Black Dog


Next it was my turn. I gathered the colors I needed, including three mixed colors using Black Dog Salvage Furniture Paint recipes. I used little lidded containers for the mixed colors in case I needed to touch up before topcoating the entire piece.

Sky:  Mountain Mist mix (1 part Roanoke Rain + 1 part Galvanized)
Grass:  Moss mix (1 part Dirt + 1 part Galvanized + 1 part Go Green)
Cat:  Black Dog Black
Lettering:  Clean Canvas
Pumpkins:  NEW RECIPE Bumpity Pumpkin (1 part I Need a Bandage + 1 part Caution: Dogs at Work)


Base for pumpkins and grass painted on with custom paint recipes from Black Dog Salvage Furniture Paint

Shop Paint

Sky filled in with Mountain Mist, a custom recipe from Black Dog Salvage Furniture Paint

View Colors


I roughly sketched out the design on the board, so I started painting with the pumpkins since the other parts revolved around them. I basecoated the pumpkins with Bumpity Pumpkin and filled in the grass area with Moss. Next, I painted the sky with Mountain Mist, kind of leaving an outline where the cat would go. You can see my inspiration photo in the picture.

I added some dimension to the pumpkins with Dirt for the shadows and Caution: Dogs at Work for the highlights on the “ribs,” mixing with General Finishes Extender to blend the colors. I continued doing this up the stack of pumpkins and also painted in a couple of stems with blends of Dirt and Moss

Starting to add in some shading and highlights

View Paint

Shading completed up the pumpkin stack

Buy Some

For the grass, I simulated some uneven areas with Dirt over top of the Moss, and then layered blades of grass over the entire area by using a mix of Moss, Dirt and/or Caution: Dogs at Work. I carried the grass up on the bottom edge of the biggest pumpkin in a few places. (How do you like my handy mixing tray? A washable Dollar General “party tray” that I got for a buck!)

The next step was to paint the cat with Black Dog (ironic, huh?) and blend in some highlights with Galvanized so he wasn’t just a flat black blob. I painted his eyes, nose and ears with little bottles of acrylic paint that I had on hand so I didn’t have to mix up a color for such a tiny part. I used a two colors of pink for his nose and ears and two shades of bright green for his eyes. Then I added some sparkle on his eyes to make them shine a little! His whiskers were painted on with a mix of Galvanized and Clean Canvas


Adding final details

View Colors

Slinky black cat 

Learn More

For the ruler marks, I measured off every 6", making a shorter line for the “in betweens.” I used two guide marks for each one to make sure I went straight across, and then made a pencil line for each. I painted those all with Clean Canvas, including the sketched-in numbers I drew at about 3" tall.

I did a few touch-ups and my part was done!


Ben again came to my aid when I handed over the painted project, and he created a base for the display to stand with the scrap boards. He and Product Manager Pete Collins made some supports on the back, which also allowed the project to be taken apart for storage by removing just three screws on each side of the bottom half.


Measurements are added in Clean Canvas

Can be taken apart easily for storage

Party Time!

We hope the little ones and their parents will enjoy this Pumpkin Stack Growth Chart for many years to come. A fun project for all to enjoy! 

You can find all the materials to create a display like this at your local Woodcraft store. Or let us help you with the next item on your woodworking to-do list. We're here to help you make wood work! 

PHOTO: This cast of characters teamed up to create a fun display for the kids. Left to Right: Peter Collins, Ben Bice, Lori Harper. 

We hope you'll be inspired!

Related Products


Write Comment

Write Comment

You must be logged in to write a comment. Log In

Top of Page