Flock Your BoxComments (0)
Now that I have your attention, you may be asking, “What is flocking?” Flocking is the process of taking small fibers and creating a felt-like, velvety surface, often used in jewelry boxes, pen cases, or lined boxes.
When I refurbished my jewelry armoire, I did NOT like the original red color inside the drawers. Plus it didn’t go with the updated paint and new crystal knobs. So I selected some blue flocking materials from Woodcraft and completely changed the insides of the drawers! It is way easier than you think and the results will impress you!
This is the jewelry armoire before… it looks a little 80’s because it was! And somehow over the years, two of the drawer pulls had come off and gotten lost.
See how I completely changed the inside of this jewelry armoire...
Here are the supplies I used. As you can see in this pic, the insides of the drawers were red. First I used a small vacuum attachment to clean the surface of all interior sections, making sure to get into the corners too.
Next, I taped off all the edges of the drawers so I wouldn’t get the adhesive where I didn’t want it. After coating the drawers with Zinsser Bulls Eye Seal Coat to prep the surface and letting it dry, I applied Donjer light blue Undercoat Adhesive to all areas I wanted to flock with a foam brush. The adhesive matches the flocking exactly to ensure a flawless look.
I had to make sure to get into each nook and cranny because the flocking will only stick where there is adhesive. I didn’t want any of the red to show through, so this step was critical. This drawer was the most challenging!
I created a “flocking box” to catch any excess fibers (trust me, this stuff is “fluffy light”!). With the Donjer Mini-Flocker, application is easy though. The flocking fibers go into the tube and you “shoot” them into the adhesive with this little puff sprayer. It’s kinda fun actually!
One thing to remember with flocking – when you think you’ve added enough flocking material, ADD MORE! While the adhesive is wet, you really want to overcoat each area. It’s much easier to gather up excess flocking than it is to try to patch a spot you miss.
After letting the adhesive dry, I shook out the excess flocking fibers into my “flocking box.” These fibers can actually be re-used so I gathered up all I could and replaced them in the bag they came in. However, I found that very little of the material came off once the adhesive soaked into it.
Here’s the final product! You would never know there was previously red in the drawers of this jewelry armoire.
We hope you'll be inspired!
Mini Flocker Flocking Fiber ApplicatorItem 127115
WoodRiver - Foam Brushes - 2" - 10 PieceItem 128731As Low As $6.29
Light Blue Flocking Fibers 3 ozItem 16Y66
Light Blue Flocking Adhesive 8 ozItem 17H32
Bulls-Eye Sealcoat Universal Sanding Sealer - Solvent Based - Gloss - QuartItem 823195
You must be logged in to write a comment. Log In