Combo SandingComments (0)
SOMETIMES IT WOULD BE AN ADVANTAGE to be able to fine-sand a bunch of small parts on a
disk sander and not have to change out the disks from coarse or medium to fine.
One solution to the problem is to cut out the center of a large disk of coarse
paper to accommodate a smaller-diameter disk of fine sandpaper. Cut out the
proper sized area from the back of the large disk (possibly the size of a small
disk – depending on the small disk available), and attach the small disk to the
middle of the sander with the large disk around the outside. This, in effect,
gives you two grades of paper on the same sanding disk. Be really frugal and
save the center of the large disk that you cut out for the same sort of setup
on some other job.
SandWet Sanding Sheets - 9" x 11" - 800 Grit - 5 PackItem 146334
SandWet Sanding Sheets - 9" x 11" - 2000 Grit - 5 PackItem 146331
SandWet Sanding Sheets - 9" x 11" - 1200 Grit - 5 PackItem 146333
SandWet Sanding Sheets - 9" x 11" - 600 Grit - 5 PackItem 85W10
You must be logged in to write a comment. Log In