A Lattice Drying RackComments (0)
This article is from Issue 43 of Woodcraft Magazine.
I was wondering what to do with a couple of PVC lattice panel
scraps left over from a deck project, when I realized they would make great
drying racks. I hung them from screws on ceiling joists (they could be screwed
to wall studs instead), and slipped square sticks into their openings to serve
as supports for work being finished. The sticks, which can be arranged in any
configuration, rest diagonally so there’s minimal contact with the finished
underside of a workpiece. If necessary to keep the lattice panels from
flopping, you can attach a spring clamp at each end of at least one stick.
Serge Duclos, Delson, Québec
You must be logged in to write a comment. Log In