Save $35 on WoodRiver® Adjustable Mobile Base
Maximise your shop space by putting tools on wheels.
Now Only $49.99
RIKON 17" VS Drill Press
Every shop needs a quality drill press. It's a must.
Save $100 Today!
Save $40 on this Bench Mortiser
Chosen as a "Best Value" by Fine Woodworking
Buy Now $249.99
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 2
Back to top
Correction of other review
Bolt Action 30 Caliber Gun Metal Pen Kit PKCP8020
A previous review stated that the Woodcraft bolt-action pen used different bushings and a 10 mm tube, which is different from the bolt-action pens from other sources. This is NOT correct. They may have been comparing a standard bolt-action kit with a magnum kit which does use a 10 mm tube. I'm not sure what they were comparing, but the PSI bolt action pen kit sold by Woodcraft is identical to the PSI bolt action kits sold elsewhere. I have two kits in front of me, one from Woodcraft, and one from another retailer and they are identical in every way. They both use a 3/8" tube and exactly the same bushings.
I have made many of these bolt-action pens over the past two years, and the quality of the Woodcraft kit that I purchased is at least as good as any that I have used in the past. I will be buying them from Woodcraft from now on.
Yes, I would recommend this to a friend
I would repurchase However
Aardvark Wood Working
Carroll County NH
If you purchased this item from PSI before DO NOT assume the bushings and drill are the same. PSI is 3/8 drill Found the kit from Woodcraft was 10mm. Found the nib assembly had a pressed in bushing that was crossed threaded.(I live round trip 160mi from store) Had to use bushings from ultra cigar to get close then used caliper to get correct diameter. Went to assemble bolt action found two scratches. Suggest you open the package and check everything before leaving the store. having made several from PSI I can recommend the pen. Just check all the specs from Woodcraft so you are not disappointed. No one at the store mentioned the difference when I purchased the kit.
1 - 2
Back to top
©2015 by Woodcraft Supply LLC