Close
Sign Up Today and Get a Special 10% Off Coupon

Freud 99-762 Adjustable Rail and Stile 2-Piece Router Bit Set Shaker Profile 1/2" Shank

Item #850347
$127.47
Qty.   or Add to Wish List

 
4.5

(2 reviews)

Read Reviews | Write a Review


Product Information:

Mill tenons of any length! Simply remove the top portion of the cutter (including bearing and spindle) to produce the front of the long tenon profile for blind tenons, through tenons or bridle joints. These precise bits work for any door 5/8" to 1-1/4" thick. Unique cutter geometry virtually eliminates tearout. Adjustable shims enable a tight fit when using plywood and also allow use with thick panels from 7/32" to 1/4" thick. High-density carbide composition and Perma-Shield® coating lengthen bit life and protect against heat and pitch build-up. 1/2" shanks.

  • Two router bits that create any door in 5/8-Inch to 1-1/4-Inch door thickness range
  • Adj. shims enable both a tight fit when using plywood panels and the ability to use thick panel
  • Unique cutter geometry virtually elimantes tearout
  • Bits feature Freud's Perma-Shield coating that reduces heat and pitch build up along with rust
  • Freud's TiCo Hi-Density Carbide to maximize bit life and material finish
  • California Residents: Click here for Proposition 65 information.

     

    REVIEW SNAPSHOT®

    by PowerReviews
     
    4.5

    (based on 2 reviews)

    100%

    of respondents would recommend this to a friend.

    Displaying reviews 1 - 2

    Back to top

    |

     
    4.0

    Beyond expectations

    By  Ed

    from Brooklyn, NY

    About Me Professional

    Pros

    • Easy To Use
    • Smooth cutting

    Cons

    • Packaging Could Be Better

    Best Uses

    Comments about Freud 99-762 Adjustable Rail and Stile 2-Piece Router Bit Set Shaker Profile 1/2" Shank :

    As a seasoned professional coming out of retirement, from woodworking, I did not expect much from this set. A friend asked me to build some cabinets to match his existing kitchen and I needed some extra cash so I took the job. I had a custom cabinet shop for over 20 years and used to do all my stile and rail doors on an industrial grade shaper, but having sold off all that beautiful equipment years ago, I was faced with doing the job with a router table arrangement. I thought it would be tough going with lots of adjustments and trial and error... But that was not the case, the set-up was a breeze, no adjustment for the tenon or mortise was necessary. the tool cut clean with no burn or chatter, it easily cut the end grain or the rails in one pass. I am very impressed with the performance or the tool, However I felt the packaging could have been a little better more oriented to proper storage than store display.

     
    5.0

    Quality items

    By  Long Bow

    from TX

    About Me Casual Do-It-Yourselfer

    Pros

    • High quality

    Cons

    • Poor manufacturer packing

    Best Uses

    • In The Workshop

    Comments about Freud 99-762 Adjustable Rail and Stile 2-Piece Router Bit Set Shaker Profile 1/2" Shank :

    Smooth cuts and edges.

    Displaying reviews 1 - 2

    Back to top

    |