Close
Sign Up Today and Get a Special 10% Off Coupon

Powermatic TurboCone Dust Collector, 1.75HP 1PH 115/230V, 2-Micron Canister Kit, Model PM1300TX-CK

Item #849659
$849.99
Qty.   or Add to Wish List

 
5.0

(4 reviews)

Read Reviews | Write a Review


Product Information:

Performance: Only fine particles move to the filter chamber making manual cleaning easier and decreasing health concerns
Prevention: Prevents the central airflow from floating chips into the filter chamber decreasing rapid performance drop due to premature clogging
Efficiency: Chips are better contained for increased packing density requiring fewer collection bag changes

  • TurboCone improves chip separation and collector bag packing efficiency
  • The cone eliminates premature filter clogging for sustained performance
  • Remote-controlled digital timer can be programmed for up to 99 minutes
  • Canister filter offers over six times filtering surface area of standard bags
  • All-metal duct construction for rigidity and improved air flow
  • Dual 4" dust ports for simultaneous collection from two machines
  • 1-3/4HP motor offers plenty of power for effective air movement
  • Collection bag uses a snap ring for rapid installation and removal
  • 10 cubic feet capacity collection bag reduces number of bag changes.
  • Four swivel casters for shop maneuverabilty
  • Length : 45 inch
  • Model Number: 1791079K
    Overall Dimensions: 37" x 29" x 72"
    Height: 30"
    Width: 23"
    Length: 45"
    Net Weight: 154 lbs
    Sound Rating: 75-90 dB
    1-Hose Connection Diameter: 6"
    2-Hoses Connection Diameter: 4"
    Bag Diameter: 20"
    Filter Bag/Canister Length: 26"
    Collection Bag Capacity: 10 cubic foot
    Collection Bag Length: 30"
    Air Flow @ 6" 1,064 cu.ft/min
    Static Pressure: 11.31 inch of water
    Particle Size (Micron): 98% of 2
    Micron particles: 86% of 1 micron particles
    Velocity @ 6": 5,374 foot per minute
    Air Inlet: (1) at 6" or (2) at 4"
    Impeller Diameter: 12"
    Impeller Fins: 6
    Impeller Material: Steel
    Separator Tank Diameter: 20"
    Separator Tank Height: 10"
    Motor Power: 1-3/4 HP
    Motor Phase: 1 Ph
    Motor Voltage: 115/230V
    Prewired Voltage: 115V
    Motor Current: 15/7.5A

    Shipping / Billing Info:

    This product ships direct from the manufacturer:
    • Your order will ship in approximately 5 business days.
    • This product is considered special order. Your account will be charged when you place your order.
    • Express or overnight shipping is not available for this product.
    • Ships by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.


    Return Information
    All returns must be pre-approved. Any non-warranty returns must be unused and in original packaging. A 25% restock fee will apply. Customer pays return freight. Please call our Customer Service Dept. at 1-800-535-4482 with any return questions.

    Warranty Information
    Because this item is purchased and shipped directly from the manufacturer, their warranty supersedes any offered by Woodcraft. Click here for Powermatic Warranty
    California Residents: Click here for Proposition 65 information.

     
     

    REVIEW SNAPSHOT®

    by PowerReviews
     
    4.8

    (based on 4 reviews)

    100%

    of respondents would recommend this to a friend.

    Pros

    • Powerful/good suction (4)
    • Easy to use (3)
    • Efficient (3)

    Cons

    • Short power cord (2)

    Best Uses

    • Reviewer Profile:
    • Frequent user (3)
    • Primary Use:
    • Business (2), Personal (2)

    Displaying reviews 1 - 4

    Back to top

    |

     
    5.0

    Love it!

    By  Pemdas

    from Mass

    About Me Occasional User

    Pros

    • Easy to Use
    • Efficient
    • Powerful/Good Suction
    • Remote Contol

    Cons

    • Line Of Sight For Remote

    Best Uses

    Comments about Powermatic TurboCone Dust Collector, 1.75HP 1PH 115/230V, 2-Micron Canister Kit, Model PM1300TX-CK :

    Yup, love it. Bought late last year and set up in my 12 x 24 basement garage this summer. Used adaptors to get from Dust collection fittings into PVC. Works great. I have all my machines hooked up and makes for a much cleaner shop environment. I went from a floor full of sawdust in an afternoon, to maybe a dustpan full of sawdust every once in a while when i feel like cleaning up. The differnce is that much! I have it connected to my miter saw, router table, band saw and table saw via PVC and flex hose. Took some time and thought it out. No problems with static electricity. Only cons are minor: remote has to be in direct line of sight to control pad. Sometimes it gets blocked depending on your position in the workshop. No biggie. Also takes about 20-30 seconds to wind down after turning off, again no biggie, it's just audible long after the machine has stopped. Very please overall. Power cord is plenty long enough. No complaints.

    • Primary Use:
    • Personal
     
    5.0

    Great upgrade for my shop!

    By  Wetsu

    from Erie, PA

    About Me Frequent User

    Pros

    • Easy to Use
    • Efficient
    • Great Features
    • Powerful/Good Suction
    • Quality Finish

    Cons

    • Heavy
    • Needs Better Bag System
    • Short Power Cord

    Best Uses

    • Small Woodshop

    Comments about Powermatic TurboCone Dust Collector, 1.75HP 1PH 115/230V, 2-Micron Canister Kit, Model PM1300TX-CK :

    I replaced an old Delta 700 CFM unit with this one on my installed shop dust collecton system. The Powermatic has plenty of suction to handle any sawdust and chips I create in my shop. I use a 4" hose with a blastgate on one inlet that connects to my fixed duct work (radial arm saw, band saw, sanders, drill press, lathe, chop saw, mortise machine). The other port has blastgate and a 4" hose I use to connect directly to my planer, table saw, router table and jointer. This dust collector and my air filtration machine has virtually eliminated sawdust in my shop and subsequently throughout my house. My shop is located in a dedicated room in the basement of my home. The Powermatic would be a little nicer if the power cord was just a couple of feet longer (why skimp on such a quality machine?) and if it had a better bag attachment system, like a snap ring on a barrel. Love the machine and I would recommend it to my fellow woodworkers.

    • Primary Use:
    • Personal
     
    5.0

    Works better than expected!!

    By  Grasshopper Guitars

    from New York

    About Me Frequent User

    Pros

    • Easy To Empty
    • Easy to Use
    • Efficient
    • Powerful/Good Suction

    Cons

    • Short Power Cord

    Best Uses

    Comments about Powermatic TurboCone Dust Collector, 1.75HP 1PH 115/230V, 2-Micron Canister Kit, Model PM1300TX-CK :

    Received my unit last week and it arrived well packed and undamaged. Had the unit together and working in 1 hour (with the help of my wife). Hooked it up to my 13'' Planer and it worked excellent...no wood dust anywhere after sending a large block of mahogany through it. Same for my router table!! Built like a tank. Only thing that I would change is the plastic knobs on the filter and a longer power cord. These issues are very minor. Also be ready to spend a few more dollars on hoses and fittings. Awesome tool!!

    • Primary Use:
    • Business
     
    4.0

    powermatic does it again!

    By  Mr.boomer

    from Kula,Maui-Hawaii

    About Me Frequent User

    Pros

    • Easy Assembly
    • Powerful/Good Suction
    • Powerfull

    Cons

    • Noisy
    • Plastic filter knobs
    • Plastic handles

    Best Uses

    Comments about Powermatic TurboCone Dust Collector, 1.75HP 1PH 115/230V, 2-Micron Canister Kit, Model PM1300TX-CK :

    Great dust collector. Beautiful finish and heavy duty. Didn't make five stars due to the plastic handles and plastic knobs. Also louder than I expected. I like the remote on-off and timer but it does have to be in the line of site to work. Would like to see a hole or a hook to hang or clip the remote this way I don't have to dig it out of a pocket or set it down and possibly loose it. Vary miner I know. Looking forward to less dust in the shop.

    • Primary Use:
    • Business

    Displaying reviews 1 - 4

    Back to top

    |