Close
Sign Up Today and Get a Special 10% Off Coupon

Rikon 1 HP Dust Collector w/5 Micron Bag Model 60-100

Item #847117 Rikon
$279.99
Qty.   or Add to Wish List

Out of stock, order now for current pricing. Expected Delivery on December 16,2016

 
4.0

(14 reviews)

Read Reviews | Write a Review


Product Information:

Model 60-100

Specs:




  • 1 HP, 110V, 7amp

  • Motor is totally enclosed, fan cooled continuous duty

  • 650 CFM

  • Precision balanced 9" steel impeller

  • 5 micron top bag, reusable 14- 3/4" clear plastic lower bag

  • 4” inlet

  • Built in casters

  • California Residents: Click here for Proposition 65 information.

     
     

    REVIEW SNAPSHOT®

    by PowerReviews
     
    3.9

    (based on 14 reviews)

    85%

    of respondents would recommend this to a friend.

    Pros

    • Easy to use (10)
    • Lightweight (9)
    • Powerful/good suction (8)
    • Efficient (7)
    • Easy to empty (6)

    Cons

    • Inefficient (2)
    • Poor design (2)

    Best Uses

    • Reviewer Profile:
    • Frequent user (9), Occasional user (4)
    • Primary Use:
    • Personal (12)

    Displaying reviews 1 - 10

    Back to top

    | Next »

     
    5.0

    The best 1hp out there

    By  24/7 woodworker

    from Bethlehem, pa

    About Me Frequent User

    Pros

    • Easy To Empty
    • Easy to Use
    • Efficient
    • Lightweight
    • Powerful/Good Suction

    Cons

    Best Uses

    • Single Use

    Comments about Rikon 1 HP Dust Collector w/5 Micron Bag Model 60-100 :

    Please ignore any of the negative comments regarding instructions or suction. All 1hp units have roughly the same suction of about 650 cfm. This is meant as a single tool dust collector. I use it for my 1.5 hp table saw, 8" jointer, bandsaw, and dewalt planer. As for the instructions, if you can build furniture then you should be able to put this together with ease. As for the unit I have purchased a plastic 4"coupler with a 4"T with a blast gate on both sides of the T. This enables me to have one hose always on my table saw and the other hose available for other machines. I purchased a 1 micron bag and I duct tape my plastic bags at the bottom. The unit is extremely well made and is easy to move around. I have used Grizzlies and PSI woodworking 1hp units as well and I belive this unit is the best. You shouldn't be disappointed with this dust collector.

    • Primary Use:
    • Personal
     
    4.0

    Good Value

    By  Bobby

    from Oregonia, Ohio

    About Me Occasional User

    Pros

    • Quiet

    Cons

    • Leaks

    Best Uses

    Comments about Rikon 1 HP Dust Collector w/5 Micron Bag Model 60-100 :

    Works good. Assembly wasn't a problem. The gasket between the blower housing and the duct leaks. It needs a thicker gasket. Buy some foam to make a thicker gasket so you won't have to take it back apart.

    • Primary Use:
    • Personal
     
    4.0

    Good machine, poor assembly instructions

    By  Realtoralanb

    from Seattle

    About Me Frequent User

    Pros

    • Price Point

    Cons

    Best Uses

    Comments about Rikon 1 HP Dust Collector w/5 Micron Bag Model 60-100 :

    I read the reviews that said it came with poor assembly instructions and assumed that the complaining reviewers were just mechanically challenged........NOT . The assembly instructions are nearly worthless. In all fairness, this is easy to assemble once you put it together for the third time. Just be prepared to spend 3 times more than you would expect assembling, Throw the instructions away and be prepared to need additional hardware as some of what is included just flat doesn't work. Other than that it seems to be a good piece of equipment.

    • Primary Use:
    • Personal
     
    4.0

    When all is said and done, I like it

    By  rustythebailiff

    from Clearwater, FL

    About Me Frequent User

    Pros

    • Easy to Use
    • Efficient
    • Lightweight
    • Powerful/Good Suction

    Cons

    Best Uses

    Comments about Rikon 1 HP Dust Collector w/5 Micron Bag Model 60-100 :

    I did lots of research before buying. I wanted to upgrade from a shop vac to something with more suction. I also needed something with a small footprint, that I could move around my small shop, uses 110v, and that wouldn't blast me out with noise. The Rikon fits the bill. I am able to hook it up to one machine at a time as needed, and can move it outside if I am working outdoors. It provides adequate suction to pull the dust from my bench saw, planer, and miter saw, and should do well with future tools. Plus, it's quiet enough to use with the doors to my work area closed. The only problems I had were with the instructions, and one very important part that came damaged. The instructions had the same flaw as earlier reviews pointed out; it's best to mount the motor unit last so that you can properly align it with the dust housing. Otherwise the two units might not match up, as the pillar for the motor has to be facing just right. The broken part was found when I had everything else assembled, and pulled the motor out of it's protective styrofoam. That's when I discovered the cooling fan impeller for the motor was broken! But, the good folks at Woodcraft Tampa replaced the unit for me, even giving me one that was already assembled and ready to go!

    • Primary Use:
    • Personal
     
    3.0

    Don't judge beauty by it's sucking power

    By  guilty snorkler

    from Florida

    About Me Frequent User

    Pros

    • Lightweight

    Cons

    • Inefficient

    Best Uses

    Comments about Rikon 1 HP Dust Collector w/5 Micron Bag Model 60-100 :

    First time user. Severe hobbyist and home renovator. Use with table saw, planer, jointer, chop saw, general clean up. It's pretty. I expected much more power. Do your research. Do your research. I won't even try setting it up on my router table. I might recommend this to a friend, definitely to an enemy. Also, RIKON customer service never returned any of my four calls. Repeat headline.

    • Primary Use:
    • Personal
     
    5.0

    Very Good Product

    By  Sheriff

    from Morehead, KY

    About Me Occasional User

    Pros

    • Easy To Empty
    • Easy to Use
    • Efficient
    • Lightweight
    • Long Power Cord

    Cons

    • Poor assembly instruction

    Best Uses

    • Miter Saw
    • Table Saw

    Comments about Rikon 1 HP Dust Collector w/5 Micron Bag Model 60-100 :

    This is a very nice product and an excellent value. The instructions for assembly, however, are really poorly written and illustrated. It took a fair amount of trial and error to put it together.

    • Primary Use:
    • Personal
     
    3.0

    It's ok. Wish I had bought a larger CFM

    By  TXOP

    from Richardson, Tx

    About Me Frequent User

    Pros

    • Easy to Use
    • Lightweight

    Cons

    • Inefficient
    • Noisy

    Best Uses

    Comments about Rikon 1 HP Dust Collector w/5 Micron Bag Model 60-100 :

    I guess it's a good buy for a 650 CFM. I heard that you should buy as much dust collection as you can afford but I would say if you can afford at least a 1100 CFM machine then wait. 650 is just not enough.

    • Primary Use:
    • Personal
     
    4.0

    efficient

    By  rayfigy

    from Modesto, Ca

    About Me

    Pros

    • Easy To Empty
    • Easy to Use
    • Efficient
    • Lightweight
    • Long Power Cord

    Cons

    Best Uses

    Comments about Rikon 1 HP Dust Collector w/5 Micron Bag Model 60-100 :

    doing woodcraft it suck wood chips well suction is excellent Motor noise when turn it off

     
    4.0

    Great single tool DC

    By  Mike

    from Centerville, OH

    About Me Occasional User

    Pros

    • Easy To Empty
    • Easy to Use
    • Efficient
    • Lightweight
    • Powerful/Good Suction

    Cons

    Best Uses

    • Single Tool Useage

    Comments about Rikon 1 HP Dust Collector w/5 Micron Bag Model 60-100 :

    My floor space is limited so a large DC was out of the picture. The primary need is for my planer, but use it for other machines as well. The first time I used this with my planer (instead of a shopvac) the suction was powerful enough that it was pulling small chips in that had landed on the infeed table!

    • Primary Use:
    • Personal
     
    3.0

    Rikon 1HP Review

    By  Chris

    from Rockville, MD

    About Me Frequent User

    Pros

    • Cost
    • Easy To Empty
    • Easy to Use

    Cons

    • Missing Parts
    • Poor Design

    Best Uses

    Comments about Rikon 1 HP Dust Collector w/5 Micron Bag Model 60-100 :

    First of all, the unit was missing a couple parts from the box, the lower dust bag and a bolt for the caster. The unit went together easily, although the instructions were lacking. Suction is as expected for a 1hp unit. The biggest drawback is the vertical dust intake. When connected to a machine with a low dust port, the hose has to bend 180 degrees to reach.

    • Primary Use:
    • Personal

    Displaying reviews 1 - 10

    Back to top

    | Next »