See everything on sale inside our Latest Sale Flyer.
Shop Our Sale Flyer
Browse your favorite woodworking catalog!
Shop Our Catalog
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 8
Back to top
Save Your Money
Rikon Bandsaw Miter Gauge for 10-305
The gauge I got is slightly undersized, so it wobbles in the slot. This just adds insult to injury, since it appears to be the only 5/8" miter gauge on the planet.
It is as if, as an afterthought, Rikon said, "Whoops, we gave our 10-305 band saw a 5/8" miter slot, and nothing fits that. We'd better throw something together to pacify our customers."
It is a bummer.
No, I would not recommend this to a friend
It would be less than 1 star if I could choose it. This Item is much too small to fit the 5/8" slot on the 10-305 Rikon bandsaws cast iron table that I purchased at the same time .
Will NOT fit a Rikon 10-305 Bandsaw !
Clover, S. C.
I will attempt to use parts from this item to make my own miter guage.
Used for parts
I used the miter gauge part and made my own bar to fit an elderly, small Sears table saw that we're using at a cabin were upgrading. Inexpensive, enough parts to make what I needed. Much better than the wood block on a stick I had been using.
Yes, I would recommend this to a friend
It is what it is
J Alfred Bloomigton III
Twin Cities, MN
As the other reviewer noted, for some reason this product comes up in a search for a 5/8" gauge. It is not, but by ordering a piece of 1/4"x5/8" aluminum from an online metals supplier and then drilling & tapping a few holes, I have a working gauge and some additional experience. Plus, I get a longer slide, which another reviewer commented on. Let's just not think about the total cost of this project....
5/8" Miter Gauge
In my search for a miter gauge, I asked for a 5/8" miter gauge!!!!! It gave me this without any explanation. Therefore I took it to be a 5/8" miter gauge. IT DOESN'T WORK!!!!!!!!!!!!!!!!!!!!!
I'm now trying to see if I can "Jerry-Build" something to add to it so it will work in my Craftsman Shaper!!!!!!!!!!!!!!
I would hope you will have an answer!!!!!!!!!!!
I tried to give a "Zero" rating!
Miter Gauge fits too tightly
Have only installed the miter gauge on the saw. It fits very tight. While use will loosen it it shoud not be this tight.
Saw those Angles
Alright for using with the 10-305 band saw, but I would prefer something with a longer sliding base
1 - 8
Back to top
©2016 by Woodcraft Supply LLC