NOVA 1624-44 Lathe Save $500
One of our most popular lathes is on sale right now!
Buy Now $999.99
WoodRiver® Tenoning Jig $69.99
Cut perfect, straight and angled mitered tenons on your table saw.
Save $25 Today
Porter-Cable Belt Sander Save 15%
Small in size, light, and easy to use - perfect for most sanding jobs!
Now Only $93.49
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 5
Back to top
Best blade for the money
Mount Holly, NC
Timber Wolf Bandsaw Blade 111" x 1/4" x 10 TPI Raker
Yes, they're a little more expensive but they outlast and out perform any other blade that I've used. Been buying them for years and only had one problem and "Woodcraft" quickly did an exchange for me. Probably the only blade that I'll ever use. I've used many different widths and TPI configurations and my opinion of all of them is the same. Top of the line product !
Yes, I would recommend this to a friend
Timber Wolf Eats Competators
Put it on and checked for resaw straightness and it was dead on
This gave me a perfect cut!
This gives a perfect cut every time!
blade was too short
My blade was only 110 1/2" long, so it was almost impossible to mount on my saw wheels even with all tension off and quick release lever disengaged. Once finally on, and engaging lever, the blade was then over-tensioned and couldn't be tracked on the tires, it just wanted to move off one edge or the other and was unhappy near the center of the tires. This is all with the coil spring tensioner completely loose. Others report blade lengths too short or too long and corresponding issues with that. The blades would work well if the correct length.
No, I would not recommend this to a friend
Great blade but oversized
I ordered a 1/4" X 111" blade for my new Rikon bandsaw. It wouldn't tension according to the tension scale on the bandsaw. I thought my tensioning mechanism on the saw was faulty. As I was turning the tensioning knob on top, after the tension indicator reached 1/2" going toward 3/8" the knob suddenly turned freely, but would not tension any more. I called Rikon Tech Support, complaining that my tensioning mechanism had ceased to work. The Tech Rep asked the make of the blade and I told him it is a Timber Wolf and he told me that was the problem. It's 3/8" longer than the specified length. It is actually 111 and 3/8" long. So it cannot be tensioned according to the tension scale. It has to be tensioned by feel. Tension it to the point that there is 1/4" deflection when side pressure is applied to the blade. It tensions all right then, but the scale on my Rikon reads between 3/8 and 1/2". It's a great blade, but buyers should be aware that they cannot tension it according to the bandsaw scale, only by the deflection method.
1 - 5
Back to top
©2015 by Woodcraft Supply LLC