Close
Sign Up Today and Get a Special 10% Off Coupon

Micro Jig GRR-Ripper System Model GR200

Item #820434
$79.99
Qty.   or Add to Wish List

 
4.5

(67 reviews)

Read Reviews | Write a Review


Product Information:

The Gripper is a revolutionary, universal pushing jig for all table saw, router table and jointer users. This is the first tool that grips and holds both sides of work piece during a ripping operation. Unlike a push stick or push block, the Gripper maintains balanced pressure on a work piece as it passes through and beyond the blade. Maintains a parallel, forward direction with the blade while keeping pressure against your rip fence to prevent burning. Eliminates the need to feed stock with your bare hands providing 100% protection. You can cut strips as thin as 1/4" without any special setup so there is no need to throw away those small scrap pieces. The unit can be offset to accommodate small, irregular shaped, pieces on the router table. Includes main body, handle, 1/4" side leg, 1/2" side leg, center leg, adjustable spacer, stabilizing accessory plate, balance support and comprehensive users manual.


  • Eliminates the need to feed stock with your bare hands
  • Universal pushing jig for all table saw, router table, and jointer users
  • Holds both sides of work piece during a ripping operation

  • California Residents: Click here for Proposition 65 information.

    Articles:

  • Don’t Let Do-It-Yourself Go Bad:
    Safe Ways to Get the Job Done
     - Being able to see, hear and breathe easily can promote a safer time when working on projects. That’s why one of the first steps to take is to protect the most important tool for a do-it-yourself project … you.
     
     

    REVIEW SNAPSHOT®

    by PowerReviews
     
    4.6

    (based on 67 reviews)

    92%

    of respondents would recommend this to a friend.

    Pros

    • Easy to use (55)
    • Good safety features (55)
    • Good grip (53)
    • Easy to store (25)
    • Good design (6)

    Cons

    • Hard to use (2)

    Best Uses

    • In the workshop (59)
    • Home repair (11)
    • Gifts (9)
    • In the field (7)
    • Home improvement (2)
    • Reviewer Profile:
    • Avid do-it-yourselfer (42), Casual do-it-yourselfer (15), Professional (8)

    Displaying reviews 1 - 10

    Back to top

    | Next »

     
    5.0

    Bought one - went back and got second

    By  Dz

    from Roswell, Ga

    About Me Avid Do-It-Yourselfer

    Pros

    • Easy To Store
    • Easy To Use
    • Good Grip
    • Good Safety Features
    • Powerful

    Cons

    Best Uses

    • In The Workshop

    Comments about Micro Jig GRR-Ripper System Model GR200 :

    Was hesitant at first - but well worth the investment -

     
    3.0

    Over-Priced and Over-Hyped Pushblock

    By  Nick

    from Houston, TX

    About Me Avid Do-It-Yourselfer

    Pros

    • Easy To Use
    • Well Packaged Presented

    Cons

    • Grossly Overpriced
    • Limited use
    • Overpriced

    Best Uses

    • For New Woodworkers
    • Novices Only

    Comments about Micro Jig GRR-Ripper System Model GR200 :

    Not much "revolutionary" about this articulating block of bright plastic. I am also concerned that novices would be tempted to remove saw safety devices in reliance upon this push block. As a woodworker for over 30 years, I suggest using sacrificial stock to accomplish similar, smaller scale tasks utilizing saw safety devices whenever possible.

     
    4.0

    Great idea and build quality.

    By  GCavener

    from Oregon City, OR

    About Me Avid Do-It-Yourselfer

    Pros

    • Easy To Use
    • Good Safety Features

    Cons

    • Quickly Loses Grip

    Best Uses

    • In The Workshop

    Comments about Micro Jig GRR-Ripper System Model GR200 :

    I've owned this jig for a few years and like it for the most part. My issue with it is that the "stickiness" of the green bottom material didn't last very long and isn't very effective on tight grained, smooth hardwoods. The design is excellent otherwise.

     
    3.0

    Great Product, poor Quality Control

    By  Ammo13

    from Ellington, Ct

    About Me Avid Do-It-Yourselfer

    Pros

    • Easy To Store
    • Easy To Use
    • Good Grip
    • Good Safety Features

    Cons

    Best Uses

    • Home Repair
    • In The Field
    • In The Workshop

    Comments about Micro Jig GRR-Ripper System Model GR200 :

    I haven't had a chance to use this yet because I couldn't finish assembling it. One of the brass inserts for the leg is protruding from the plastic housing so the leg won't sit flush. This is critical as the push block won't either sit flush against the fence or be perpendicular to the work surface when cutting. It was nice to see that the product is made in the US, sad to see that such an easily detectible defect was not caught. However, this push block does boast all the features that you see online or in the videos. The bottom surface is very sticky for gripping your work piece. I can't wait to be able to swap this one out for a new one, hopefully I won't run into the same problem. I will update this post when the new one comes in.

     
    5.0

    Excellent product!

    By  GNWS

    from Cloverdale, CA

    About Me Casual Do-It-Yourselfer

    Pros

    • Easy To Use
    • Good Grip

    Cons

    Best Uses

    • In The Workshop

    Comments about Micro Jig GRR-Ripper System Model GR200 :

    Having read much about the GRR-Ripper, I finally decided to purchase one and try it. The product lives up to all its positive reviews--well designed, versatile, and very cool that it's actually made in the U.S. I use it at the table saw, where I'm making clean and precise cuts on small workpieces like never before. Highly recommended.

     
    5.0

    Wish I would have bought this sooner!

    By  Scott L

    from Colorado Springs, CO

    About Me Avid Do-It-Yourselfer

    Pros

    • Easy To Use
    • Good Grip
    • Good Safety Features

    Cons

    Best Uses

    • In The Workshop

    Comments about Micro Jig GRR-Ripper System Model GR200 :

    I am very impressed with this jig. It took a few minutes to assemble but after that I was ripping thin stock in no time. I felt very comfortable ripping stock so thin that I never would have considered trying the cut before this jig.

     
    5.0

    GRR Ripper System

    By  JP

    from South Africa

    About Me Casual Do-It-Yourselfer

    Pros

    • Easy To Store
    • Easy To Use
    • Good Grip
    • Good Safety Features
    • Powerful

    Cons

    Best Uses

    • In The Workshop

    Comments about Micro Jig GRR-Ripper System Model GR200 :

    The high degree of safety built into the GRR Ripper impressed me most. I don't see how anyone can work on a table saw or router without it.

     
    5.0

    Safety Last?

    By  Will

    from PA

    About Me Casual Do-It-Yourselfer

    Pros

    • Easy To Store
    • Easy To Use
    • Good Grip
    • Good Safety Features

    Cons

    Best Uses

    • In The Workshop

    Comments about Micro Jig GRR-Ripper System Model GR200 :

    This is a solid and well made, well thought out table saw accessory that offers more control and stability than any push stick or block. You could perform thin rip cuts with small stock that would be impossible with a push pad and unnerving with any other push stick design. Most importantly, it keeps your hands safe. The only trade off is the extra set-up/ adjustment time to avoid damaging one of the Gripper's legs, but nothing that would keep you from using it whenever possible.

     
    5.0

    Works great

    By  B

    from Southern New Jersey

    About Me Avid Do-It-Yourselfer

    Pros

    • Easy To Use
    • Good Grip
    • Good Safety Features
    • Repeatable Narrow Cuts
    • Well Designed

    Cons

    Best Uses

    • In The Workshop
    • Safe Cutting Short Pieces
    • Safe Narrow Cuts
    • Safe Way For Some Cuts

    Comments about Micro Jig GRR-Ripper System Model GR200 :

    I safely ripped 1/8" off a short board (maybe ten inches long) I would never have tried cutting without this device. Making such a cut would have simply been too dangerous. Once I install a zero clearance insert in my table saw, the gripper will enable me to make repeating narrow rip cuts without having to adjust the rip fence.

     
    4.0

    Safety is most important!!!

    By  Frank

    from Pine Valley, Utah

    About Me Avid Do-It-Yourselfer

    Pros

    • Easy To Store
    • Easy To Use
    • Good Grip
    • Good Safety Features

    Cons

    Best Uses

    Comments about Micro Jig GRR-Ripper System Model GR200 :

    This is a very useful tool; I feel much safer using this on the table saw than what I was using in the past.

    Displaying reviews 1 - 10

    Back to top

    | Next »