See everything on sale inside our August Sale Flyer.
Shop Our Sale Flyer
Browse your favorite woodworking catalog!
Shop Our Catalog
Look up product instructions, videos and articles about your favorite tools using our Learning Center.
Join us on your favorite social network! Share your projects and learn from other woodworkers.
Please Note: This item can only be shipped ground to the 48 contiguous states. Some
items cannot be shipped via air due to being flammable, magnetic, contains batteries,
hazardous fumes or where contents are under pressure. Please use a physical address
not a PO Box during checkout.
of respondents would recommend this to a friend.
1 - 3
Back to top
Yooper Karl's brother
Mylands Clear Wax
I apply this product after three coats of varnish/tung oil/turpentine mixture. I apply a small amount with a rag then I use steel wool to sand out the final finish. Then I polish with a clean rag. I find this to be far superior to the minwax product. Apply sparingly. If you apply additional coats of wax the finish just gets better. This wax gives a high luster and a kind of three dimensional appearance to fine wood. Highly recommended.
Yes, I would recommend this to a friend
This is a Woodturners Must Have
I use Mylandis for finishing my small to medium size projects on the lathe. I Sand to 800 Grit, apply generously , and then buff. The shine is consistent and deep.
Excellent on walnut
Michigan's Upper Peninsula
Used to finish a small abstract walnut carving. Wonderfully enhanced the grain and range of colors in the wood. Hard, semi-gloss finish, applied a number of times, using a small amount each time. Rub a little in, sit a couple minutes to let the solvent evaporate, buff it out.Helps to have a window open; solvent odor is strong. Wait a day for the finish to completely harden. Repeat until it stops improving the look / I applied ~ 8 coats. Couldn't be happier w/ the results.
1 - 3
Back to top
©2016 by Woodcraft Supply LLC