Festool products can only be sold in the 50 states.
The new CT48 incorporates increased capacity, innovation and versatility into this new design. With the dual mode power activation, the user chooses either a tool activated or manual activated start-up. This CT (Cleantec®) unit is extremely mobile, with a sturdy chassis, extra large low abrasion rear tires, and double swivel casters up front to easily negotiate any obstacle. The CT48 dust extractor can be secured in place with a single point foot brake. The filter bags have even been redesigned to be self cleaning. These bags inflate and deflate with the cycling of the unit for maximum suction force and efficiency. An integrated hose garage has been added for easy hose storage. As with all Festool dust extractors, the CT48 utilizes the Sys-Dock system that facilitates the use/storage of one or more Systainers to the top of the unit. It will work wet or dry with no complex conversion, and it is remarkably quiet. Includes: CT 48E – 12.7 gallon HEPA Mobile Dust Extractor, HEPA filter, (1) fitted self-cleaning filter bag, and (1) 1 1/16" x 11.5' antistatic suction hose.
Power Consumption: 2.9 – 10 amps @ 120V
Capacity: 12.7 gallon (48 L)
Noise Level: 62-71 dB(A)
96" Static Water Lift
Max Suction Force - 137 CFM
HEPA Filter Surface Area: 3.29 ft2
Dimensions (LxWxH): 38.5" x 6.5" x 28.75"
Weight: 29.8 lbs.
Power Cord 12 AWG: 24.5' length
Stepless electronic suction control
The Festool Kapex miter saw comes with Festool's high-quality 60-tooth carbide blade for use when cutting woods or soft plastics , the angle transfer device, a hold-down clamp for securing material, and a wrench for unit adjustments. Compact and lightweight at 21.5 kg (47 lbs). Use the fine adjustment knob to control bevel angles in fractions of a degree. The bevel knob has three settings: positive detents at 0 and -45 degrees, free movement between -45 and +45 degrees, and free movement up to +/- 47 degrees. Bevels can be made to the left or right, and the bevel gauge appears on both sides of the saw. The Kapex blade creates a thin kerf which reduces load on the motor and improves the cut quality. The blades are specially designed to reduce noise levels and dampen vibration. The large 30mm arbor hole reduces blade deflection. A special cutting position allows the Kapex to have a cutting capacity as large as 4-3/4" (120mm). The deck height of the Kapex matches the height of our Systainer 1 storage containers. On the job site, you can use one or more systainers to support the material being cut. The difference in height between the MFT/3 and MFT/3-Kapex multifunction tables is also equal to the height of the deck providing optimal work flow and support. The Magnesium alloy base of the Kapex was designed to be extremely rigid and durable yet very lightweight. Rubber feet in each corner provide useful traction and fit into the grid hole pattern of any Festool multi-function table. Features Festool's patented FastFix blade change system. Turning the FastFix knob locks the arbor, mechanically locks out the trigger, and allows the blade to be changed with a single hand. Dual-line lasers define the entire cut area.